Spec Sheet

4-Ø4.8
85.6
85.6
Dimensions, Camera Bottom
Parts included
Quantity Component
1 AUTODOME 4000 Mini PTZ Dome Camera
1 Drilling Template for flush mount
4 6 x 30 mm plastic anchors
4 #8 x 32 screws and attached O-rings
4 M4 x 12 Torx screws and attached O-rings
1 T20 Security Torx wrench
1 Installation Manual
Technical specifications
Camera
Imager 1/4" Double Scan Super HAD CCD II
Lens size fW=3.49 ±0.17 mm fT=104.02 ±5.20
mm
(30x +/- 10% Optical Zoom)
Effective Pixels PAL: 976 (H) x 582 (V)
NTSC: 976 (H) x 494 (V)
Horizontal Resolution 720 TVL (NTSC, PAL)
Optical Zoom 30x Effective Optical Zoom
Digital Zoom 10x
Field of View
(approximate)
2.46° (TELE) to 69.5° (Wide)
Focus Automatic with manual override
Signal-to-Noise Ratio
(SNR)
>50 dB
White Balance Auto, indoor, outdoor, one push
Minimum Illumination 0.2 Lux/ F1.65
0.001 Lux/DSS
0.1 Lux/ICR
Iris Control Auto
Wide Dynamic Range
(WDR)
On/Off
Dynamic Noise
Reduction (DNR)
3DNR
Privacy 15 zones maximum
Mechanical
Weight 1.5 kg (3.3 lb)
Pan Range 360° continuous
Tilt Range 0° to 180° (90° when 3D Privacy Masking
is enabled)
Flip Rotate 180° at bottom of tilt
Auto Scan 8 Auto Scan modes including vector scan
Pre-position Speed 360°/s
Preset Positions 99 (Bosch OSRD);
210 (Pelco P/D) positions with camera
status
Tours 8 Tours (Preset, Pattern, Scan)
Patterns 8 Patterns
On-Screen Display (OSD) Camera ID, Title, Mode, and Angle (multi-
language)
Multi-language OSD English, Chinese, Dutch, French, German,
Italian, Russian, Spanish
Electrical
Power Supply 24 VAC ± 10%, 50/60 Hz
Built-in power line surge
Power Requirements 24 VAC adapter, 1 A (2.5 A with heater)
Power Consumption 24 VAC, 850 mA / 20 W (without heater)
24 VAC, 2A / 45 W (with heater)
Alarm Input 4 normal dry contacts (selectable NC/NO)
Alarm Output 1 normal relay 5 VDC / 40 mA maximum
(selectable NC/NO)
Control RS-485; baud rate: 2400-38.4 Kbps
(default = 9600 bps)
Access Time 0.75 second maximum preset recall time
Camera Address (ID) Physical - 99
Environmental
Ingress Protection Rating IP66
External Mechanical
Impact
(IK Code or Impact
rating)
IK10
2 | AUTODOME 4000