Spec Sheet

Fiber Optic Kits
The VGA-FIBER-AN (multimode) is an analog, fiber op-
tic conversion kit for use with 100 and 600 Series Au-
toDomes. This module is a video transmitter/data re-
ceiver modules designed to be mounted directly into
an AutoDome power supply box.
The VG4-SFPSCKT is a unique media converter module
for use with 700 and 800 Series AutoDomes. This me-
dia converter is designed to accept a wide-range of
10/100 Mbps Small Form-factor Pluggable (SFP) mod-
ules for use with Multimode or Singlemode optical fi-
ber with LC or SC connectors. The media converter
module along with the SFP module is user-installed di-
rectly into the AutoDome's power supply box to pro-
vide an integrated fiber optic solution.
Bubbles
Bosch offers a range of bubbles for in-ceiling and
pendant housings.
AutoDome impact-resistant rugged polycarbonate bub-
bles protect your camera from vandalism. Designed to
meet stringent strength standards without compromis-
ing optical clarity, rugged bubbles can withstand im-
pacts equivalent to a 10 pound (4.5 kilograms) weight
dropped from a height of 10 feet (3 meters).
AutoDome low-impact, high-resolution acrylic bubbles
offer enhanced image clarity.
Both the rugged polycarbonate and the high-resolution
acrylic bubbles are available in clear or tinted versions.
The clear bubble offers maximum sensitivity by allow-
ing as much light through as possible. The tinted bub-
bles offer covertness by making it difficult to see the
direction the camera is looking from the outside.
Cold Weather Accessory
The optional VG4-SHTR-XT extreme temperature kit al-
lows an AutoDome 600 outdoor pendant to operate in
temperatures down to -60°C (-76°F), ensuring reliable
operation in even the harshest environments.
Installation/Configuration Notes
AutoDome Series cameras are available as fully-assem-
bled pendant or in-ceiling units. These units are pack-
aged without mounting hardware or accessories so
that you can choose only the parts needed for your ap-
plication and environment.
Pendant Mounts
Pendant housings must be mounted to an arm or to a
pipe using one of the options below. Various mounting
accessories are also available to extend these mount-
ing options to a host of applications.
VG4-A-PA0 Arm mount with power supply box, no trans-
former
VG4-A-PA1 Arm mount with power supply box, 120 VAC
transformer
VG4-A-PA2 Arm mount with power supply box, 230 VAC
transformer
VGA-PEND-ARM Arm mount with wiring, no power supply box
VG4-A-9543 Pipe mount for a 1-1/2 inch (NPS) pipe
VG4-A-9230 Roof mount with parapet and VG4-A-9543 pipe
mount
VGA-ROOF-MOUNT Roof mount with parapet only
Pendant Mount Accessories
Accessory Description For Use With
VGA-PEND-
WPLATE
Mounting plate VGA-PEND-ARM
VG4-A-9541 Pole mount adapter VG4-A-PA0
VG4-A-PA1
VG4-A-PA2
VGA-PEND-ARM
VG4-A-9542 Corner mount adapter VG4-A-PA0
VG4-A-PA1
VG4-A-PA2
VGA-PEND-ARM
LTC 9230/01 Flat roof mount adapter VG4-A-9230
VGA-ROOF-MOUNT
In-ceiling Support Kits
In-ceiling housings can be mounted to a drywall ceiling
out of the box, but Bosch offers various kits to attach
an in-ceiling housing to a suspended or to a drop ceil-
ing. Kits are also available to add IP54 environmental
protection to these housings.
Support Kit Description For Use With
VGA-IC-SP Bracket for suspended or drop
ceilings
(AutoDome 100/600 Series)
VG5-161-
CT0
VG5-162-
CT0
VG5-163-
CT0
VG5-164-
CT0
VG5-613-
CCS
VG5-613-
CTS
VJR-A3-SP Bracket for suspended or drop
ceilings
(AutoDome 700/800 Series)
VG5-723-
CCE2
VG5-713-
CCE2
VG5-825-
CCEV
2 | AutoDome Series Mounts and Accessories