Specifications
Table Of Contents
- General Purpose
- What’s New in This Release
- Continual Support
- American Dynamics
- ACTi Corporation
- Arecont Vision
- AXIS Communications
- Bosch
- CBC
- FLIR
- Panasonic Corp
- Samsung
- SONY
- Camera Specific Release Notes
- American Dynamics 8 Channel IP Encoder (M&H)
- American Dynamics Fixed IP Camera
- American Dynamics Fixed Camera (illustra 400 series)
- American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)
- American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)
- American Dynamics IP SpeedDome
- ACTi Corporation
- Arecont Vision
- Axis Communications
- Bosch
- CBC
- FLIR
- Panasonic
- Samsung
- SONY
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)
18-4 Camera Handler Release Notes
•illustra 210 = H264, Maximum available Fps, D1
•illustra 600 = H264, Maximum available Fps , 1280X720
•illustra 610 = H264, Maximum available Fps , 1920X1080
Special Points
• Some properties are normalized to a percentage (1-100), but the real value in camera is a range
from -127 to 128. This results in the values in the NVR not covering all values in the camera.
• The same illustra 600 series camera should not be added to more than one NVR.
• When the camera is added to NVR, it is recommended not to change settings from the camera
web page (especially video and audio) because the change may need to reboot the video codec
and this will affect the NVR.
• When changing the video resolution, frame rate, quality, bit rate, audio codec, the code stream
will reboot. At this time, the related property cannot be accessed.
• Resolutions on stream1 and stream2 cannot be changed at the same time.
• 610LT models have removed some functionality available in the 610 standard models. This
removed functionality is IR illuminator support, SD card support, and TV input/output support.
• The illustra 210 models have no support for Region of Interest, Face Detection and Pseudo Multi
Pass Encoding.