Specifications

American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)
19-2 Camera Handler Release Notes
rtsp://camera_ip/video2.sdp
• The rtsp A/V mixed stream URL is:
rtsp://camera_ip/live1.sdp
or
rtsp://camera_ip/live2.sdp
Required Network Ports
• Port 80 is for HTTP
• Port 554 is for RTP/RTSP
Default Username & Password
• Username: admin
• Password: admin
Limitations
• When a factory defaulted camera is added to an NVR, the default settings are: H.264, 7 FPS,
CIF. When the user wishes to change the settings they can for single streaming increase the
FPS and resolution to max and click Save. For dual streaming, user can enable 2nd stream by
selecting Alarm or Record. They should change the codec to MJPEG and click Save.
• To meet the highest single stream FPS, the user can enable dual stream on the NVR, configure
the stream codec/resolution/fps/quality for Stream 1, and then configure Stream 2 to lowest
resolution/fps/quality. Once Stream 2 is configured the user can disable it on the NVR.
Alternatively the user can access the camera's web GUI settings to change Stream 2 to the
lowest resolution/fps/quality. For some properties' the value is retrieved from camera itself
(resolution, frame rate, quality, brightness, contrast, sharpness) result in that when user adds the
camera, the return value is not the default value defined in the NVR, but the actual value in
camera.
• The camera will reboot when changing codec (audio or video), resolution, frame rate, key frame
interval, video quality, audio volume, enable audio/audio in or any other video/audio properties.
Average time for reboot is 30 seconds.
• Changing the video/audio codec or resolution may cause the RTSP service in the camera to
crash. With the camera failing to restart and set new streams, the workaround is to reboot or
power cycle the camera and reset stream settings.
• All streams will be lost when camera reboots and be automatically reestablished on startup.
• When the camera is rebooting, NVR video and audio properties may not be available to get or
set. Any changes made to these settings during reboot time will not be saved.
• In the NVR, under image settings the Video Standard will always display NTSC in the dropdown
list, irrespective of it being NTSC or PAL. For PAL cameras, FPS will show 25 as max FPS.
• When the primary and secondary streams are configured with the same codec on the camera
web GUI, changing stream on the NVR may change the opposite stream to the one you wish to
change. Stream 1 and Stream 2 on the NVR will not necessarily reflect primary and secondary