Specifications
Table Of Contents
- General Purpose
- What’s New in This Release
- Continual Support
- American Dynamics
- ACTi Corporation
- Arecont Vision
- AXIS Communications
- Bosch
- CBC
- FLIR
- Panasonic Corp
- Samsung
- SONY
- Camera Specific Release Notes
- American Dynamics 8 Channel IP Encoder (M&H)
- American Dynamics Fixed IP Camera
- American Dynamics Fixed Camera (illustra 400 series)
- American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)
- American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)
- American Dynamics IP SpeedDome
- ACTi Corporation
- Arecont Vision
- Axis Communications
- Bosch
- CBC
- FLIR
- Panasonic
- Samsung
- SONY
Axis Communications
23-2 Camera Handler Release Notes
Camera Serial Number
NVR will use the camera’s MAC address as the camera serial number.
Supported Key Functions
• Video Streaming – Single and Dual
• Audio Streaming – Audio codec supported depends on the camera.
• PTZ – Applies to cameras that have mechanical Pan and Tilt and Optical Zoom.
• Dry Contact Events
• Query Device
• Reboot Device
Video/Audio Stream Feature
• For VAPIX 3 cameras, all MJPEG, MPEG-4 and H.264 streams can have different frame rates,
resolution and quality.
• Cropped resolutions are not supported and do not appear in the resolution selection list.
Limitations
• Due to limitation in the Axis Encoder PTZ support, AD Ultra 8 analog PTZ presets are not
supported on Axis Encoders.
• When working with Axis encoders the number of Presets is supported at:
• 32 for Pelco analog cameras. It is known from Axis that this is a Pelco driver
limitation
• 20 presets on M7001 encoder (Axis Encoder limitation)
• 50 for Bosch analog cameras
• Preset capabilities for the UltraDome 8 analog cameras do not function properly with the Axis
encoders.
This issue is not limited to the Victor Client; it occurs when trying to add/select/delete
presets through the Axis web interface itself as well.
This is an Axis encoder issue. As AD Ultra
8 analog cameras do not support presets, they can be added on NVR GUI and victor client, but
do not function when executed.
• For Pelco analog cameras added to M7001 will produce shaky video and video loss .
• For cameras that claim to support absolute and auto focus but fail to provide minFocus and
maxFocus (the focus range), the NVR web page (Image Settings -> Lens/Sensor) will display
the Auto-Focus option but will not display the focus range when Auto-Focus is disabled. The
AXIS 215 is an example of such a camera.
• The victor client activity window shows an unexpected extra offline entry and online entry for the
AXIS 207W camera after it has been disconnected and then reconnected. This second
offline/online entry is due to an apparent flaw in the AXIS 207W camera