Specifications
Table Of Contents
- General Purpose
- What’s New in This Release
- Continual Support
- American Dynamics
- ACTi Corporation
- Arecont Vision
- AXIS Communications
- Bosch
- CBC
- FLIR
- Panasonic Corp
- Samsung
- SONY
- Camera Specific Release Notes
- American Dynamics 8 Channel IP Encoder (M&H)
- American Dynamics Fixed IP Camera
- American Dynamics Fixed Camera (illustra 400 series)
- American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)
- American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)
- American Dynamics IP SpeedDome
- ACTi Corporation
- Arecont Vision
- Axis Communications
- Bosch
- CBC
- FLIR
- Panasonic
- Samsung
- SONY
Bosch
24-4 Camera Handler Release Notes
Limitations
• Due to a camera limitation, the handler can only support one MJPEG stream. If a second
MJPEG stream is enabled, the NVR will produce an error message.
• Bosch camera supports two H264 streams. Handler default stream is H264 stream1. Due to
camera limitations, H264 stream 2 resolution depends on H264 stream1 resolution.
Note
H264 stream 1 and stream 2 refer to H264 streams from the camera
corresponding with the camera encoder profile1 and profile 2, not streams 1 and 2
on the NVR.
From the table above, the resolution on both H264 stream 2 and MJPEG stream must be
equal or les than H264 stream 1. This means, when changing H264 stream 1 resolution to a
smaller one, ensure it is equal to or less than the resolution on both H264 stream 2 and
MJPEG stream.
• Due to a camera limitation, if the user starts MJPEG stream or H264 stream2 with HD resolution,
please make sure H264 stream 1 resolution is equal to or higher than the resolution on MJPEG
stream or H264 stream 2.
• Bosch has implemented the CGI to get the Camera Type instead of the Model name labeled on
the camera. So the Camera Type is shown in the model list on the NVR.
• Bosch cameras do not support changing the Video Standard, only viewing the Standard. Bosch
cameras have 3 Video Standards: NTSC, PAL and HD. If the camera video standard is HD,
“UNKNOWN” will be displayed on the NVR Camera Image Settings page.
Resolution List on
H264 Stream 1
Current Value of H264
Stream 1
Resolution List on
H264 Stream 2
Resolution List on
MJPEG Stream
1920x1080
1280x720
4CIF
704x432
512x288
CIF
256x144
1920x1080 1920x1080
1280x720
4CIF
704x432
512x288
CIF
256x144
1920x1080
1280x720
4CIF
704x432
512x288
CIF
256x144
1920x1080
1280x720
4CIF
704x432
512x288
CIF
256x144
1280x720 1280x720
4CIF
704x432
512x288
CIF
256x144
1280x720
4CIF
704x432
512x288
CIF
256x144
1920x1080
1280x720
4CIF
704x432
512x288
CIF
256x144
4CIF or below 4CIF
704x432
512x288
CIF
256x144
4CIF
704x432
512x288
CIF
256x144