Specifications
Table Of Contents
- General Purpose
- What’s New in This Release
- Continual Support
- American Dynamics
- ACTi Corporation
- Arecont Vision
- AXIS Communications
- Bosch
- CBC
- FLIR
- Panasonic Corp
- Samsung
- SONY
- Camera Specific Release Notes
- American Dynamics 8 Channel IP Encoder (M&H)
- American Dynamics Fixed IP Camera
- American Dynamics Fixed Camera (illustra 400 series)
- American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)
- American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)
- American Dynamics IP SpeedDome
- ACTi Corporation
- Arecont Vision
- Axis Communications
- Bosch
- CBC
- FLIR
- Panasonic
- Samsung
- SONY
CBC
25-2 Camera Handler Release Notes
Default Username & Password
• Username: admin
• Password: <The password should be left blank>
Supported Resolution
Limitations
Note
Refer to Limitations stated for Arecont Vision as they also apply for CBC products.
• Due to NVR 4.1 motion detection only handling resolution up to 1280x960 for AV1XXX,
AV8XXX, AV2100, AV2105 and AV2110, motion detection can only handle resolution as half.
• Due to camera limitation, for CBC cameras all MJPEG only cameras (Arecont: AVxx00, AV8180,
AV8360 – CBC: MP1A, MP2A, MP5A and MP8D-L4) will stream at a higher FPS (reaching max
FPS) when setting to 15FPS. FPS of 14 and lower are not affected by this issue.
• When upgrading to latest camera handler pack, note that the parameters of video streams may
be changed to the default values. It is recommended to recheck video codec parameters when
upgrading or restoring configuration backups.
Known Issues
Note
Refer to Known Issues stated for Arecont Vision as they also apply for CBC products.
• Live view and playback streaming (instant playback) on the NVR does not "pace" delivery of
large amounts of data well, causing overflows in network buffers at the VEclient. This issue is
more noticeable when using higher bitrate cameras and will cause skipping in live video and
playback on the VEclient. For video retrieval on higher bitrate cameras it is advisable to search
and retrieve the clip, this will display the recorded video without this issue.
• NVR receiving H.264 with timestamp prior to last one received. This is a firmware issue. Beta
firmware has been received from Arecont and resolved the issue, awaiting formal release
(Arecont Ticket: TECHSUP: 15516).
Model Max Resolution Resolution Options on NVR
MP1A 1280x1024 1280x1024 / 640x512
MP1DN 1280x1024 1280x1024 / 640x512
MP2A 1600x1200 1600x1200 / 800x600
MP2DN 1600x1200 1600x1200 / 800x600
MP3DN 2048x1536 2048x1536 / 1024x768 (For MJPEG – only 1024x768)
MP5A 2560x1920 2560x1920 / 1280x960
MP5DN 2560x1920 2560x1920 / 1280x960 (For MJPEG – only 1280x960)
MP8D-L4 1600x1200 1600x1200 / 800x600