Specifications

Panasonic
27-5
Settings, Video Processing Amp) is not available. Some camera models, including SC384, will
display Back Light Compensation as “Unknown” and other models will display “0”.
Note
Please refer to Panasonic cameras release notes published on the Panasonic website for more
information about Panasonic cameras and limitations.
Known Issues
Model Known Issues
NW484 By default, the MPEG-4 capability is turned off programmatically. This will effectively
disabled the audio capability, since the Panasonic handler utilizes MPEG-4 stream for audio
streaming.
MJPEG frame rate can be reduced if customer manually enables the MPEG-4 capability
directly through the camera’s web interface.MJPEG frame rate can be reduced if customer
manually enables the MPEG-4 capability directly through the camera’s web interface.
NW502S, NP502 Max frame rate for dual streaming are 15fps for VGA and 10 fps for QVGA.
For single video stream, when the resolution is 1.3 mega pixels, the maximum frame rate
for H.264 is 30fps. When the resolution is 3 mega pixels, the maximum frame rate for H.264
is 15fps
The mode settings of H.264 and MPEG-4 operation needs to be explicitly set at the camera
Video standard has been wrongly represented in this case as video mode, which is either 3
megapixel or 1.3 megapixel mode, with 4:3 and 16:9 aspect ratio settings. Since mode is
not supported by Encoder profile, we have used this as this has high impact on video
streaming. (Shall wait for a decision if this is objected)
Image white-balance supports 3 settings, namely
“1” – Auto White balance control mode
“2” – Auto tracking white balance mode
“3” – Auto tracking white balance under a sodium lamp mode
NW960, NW964, NS950,
NS954
By default, the MPEG-4 capability is turned off programmatically. This will effectively
disabled the audio capability, since the Panasonic handler utilizes MPEG-4 stream for audio
streaming
MJPEG frame rate can be reduced if MPEG4 is manually enables directly through the
camera’s web interface
Video standard has been wrongly represented in this case as video mode, which is either 3
megapixel or 1.3 megapixel mode, with 4:3 and 16:9 aspect ratio settings. Since mode is
not supported by Encoder profile, we have used this as this has high impact on video
streaming. (Shall wait for a decision if this is objected)
Supports 256 presets in the camera
Supported pattern count is based on configuration in the camera which might vary as 1, 2 or
4.
Image white-balance supports 3 settings, namely
“1” – Auto White balance control mode
“2” – Auto tracking white balance mode
“3” – Auto tracking white balance under a sodium lamp mode
SF332, SF335, SF336
(SW352, SW355)
SF336 picture quality is 1.3 mega pixels; there are two aspect ratios 4:3 & 16:9. MPEG-4 is
not available when 16:9 is selected
When either H.264 or MPEG-4 transmission is set to On, the maximum frame rate for
MJPEG is 5fps
The mode settings of H.264 and MPEG-4 operation needs to be explicitly set at the camera
Video standard has been wrongly represented in this case as video mode, which is 1.3
megapixel mode, with 4:3 and 16:9 aspect ratio settings.
Image white-balance supports 3 settings, namely
“1” – Auto White balance control mode
“2” – Auto tracking white balance mode
“3” – Auto tracking white balance under a sodium lamp mode