Specifications

VIP X1600 | Installation and Operating Manual EN | 39
Bosch Security Systems | 2006-03 | V2.0 Configuration using a Web Browser
Camera name stamping:
This field sets the position of the camera name overlay. It can be displayed at
the Top, at the Bottom or at a position of your choice that you can then specify
using the Custom option. Or it can be set to Off for no overlay information.
Time stamping:
This field sets the position of the time overlay. It can be displayed at the Top, at
the Bottom or at a position of your choice that you can then specify using the
Custom option. Or it can be set to Off for no overlay information.
Alarm mode stamping:
Choose On to display a text message overlay in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the Cus-
tom option. Or it can be set to Off for no overlay information.
– Select the desired position from the lists.
– If you select the Custom option, additional fields are displayed where you
can specify the exact position (Position (XY):).
– In the Position (XY): fields enter the values for the desired position.
Displayed alarm message:
Enter the message to be displayed for an alarm. The maximum text length is
31 characters.
Video watermarking:
Choose On if you wish the transmitted video images to be "watermarked".
After activation, all images are marked with a small green rectangle. A red rect-
angle indicates that the sequence (live or saved) has been manipulated.