Specifications

VIP X1600 | Installation and Operating Manual EN | 61
Bosch Security Systems | 2006-03 | V2.0 Configuration using a Web Browser
– Click the Stop button to deactivate the currently selected partition for record-
ing. Recordings that are currently running will be interrupted and the config-
uration can be modified.
Continuous recording
You can specify the times during which continuous recording to the hard drive
should take place.
Separate selection fields per partition are available for each day of the week,
allowing settings to be made per camera input. You can select up to 16 individual
recording time intervals for each day of the week.
Note
If a time interval has already been selected for alarm recording, you cannot
select it for continuous recording (see Alarm recording, page 62).
– Left-click the point in the schedule at which recording should start and hold
the button down.
– Drag the selected field to the desired recording end and then release the
mouse key.
– Right-click a highlighted time interval to delete it.
– Click the Select all button to highlight all time intervals.
– Click the Clear all button to delete all highlighted time intervals.
Recording status:
The graphic indicates the recording activity in this partition. You will see an ani-
mated graphic while recording is taking place.