Specifications

VIP X1600 | Installation and Operating Manual EN | 69
Bosch Security Systems | 2006-03 | V2.0 Configuration using a Web Browser
Destination password:
If the remote station is password protected, enter the password here.
Auto-connect:
Select the On option to automatically re-establish a connection to one of the
previously specified IP addresses after each re-start, after a connection break-
down or after a network failure.
Note
Stream 2 is always transmitted for automatic connections. Bear this fact in
mind when assigning the profile (see page 42).
Audio:
Select the option On if you wish to additionally transmit a standalone G.711
encoded audio stream with alarm connections.
Note
Audio signals are only transmitted if the audio function has been activated
on the Audio settings page (see page 47).
Default camera:
Here you can select the camera whose image will be automatically displayed
first on the receiver when the alarm connection is made. Depending on the sys-
tem configuration, the receiver can then select the other cameras as well.
Note
The numbering follows the labeling of the video inputs on the actual unit.