Specifications

EN | 72 Installation and Operating Manual | VIP X1600
Configuration using a Web Browser Bosch Security Systems | 2006-03 | V2.0
Sensitivity
The basic sensitivity of the motion detector can be adjusted for the environmen-
tal conditions to which the camera is subject.
The sensor reacts to variations in the brightness of the video image. The darker
the observation area, the higher the value that must be selected.
Min. object size:
You can specify the number of sensor fields that a moving object must cover to
generate an alarm. This setting prevents objects that are too small from trigger-
ing an alarm.
A minimum value of 4 is recommended. This value corresponds to four sensor
fields.
Selecting the area
The areas of the image to be monitored by the motion detector can be selected.
The video image is subdivided into 858 square sensor fields. You can activate
or deactivate each of these fields individually. If you wish to exclude particular
regions of the camera's field of view from monitoring due to continuous move-
ment (by a tree in the wind, etc.), the relevant fields can be deactivated.
– Click Select area to configure the sensor fields. A new window will open.
– If necessary, click Clear all first to clear the current selection (fields marked
red).
– Left-click the fields to be activated. Activated fields are marked red.
– If necessary, click Select all to select the entire video frame for monitoring.
– Right-click any fields you wish to deactivate.
– Click OK to save the configuration.
– Click the close button (X) in the window title bar to close the window without
saving the changes.