Specifications

EN | 74 Installation and Operating Manual | VIP X1600
Configuration using a Web Browser Bosch Security Systems | 2006-03 | V2.0
Scene too bright
Activate this function if tampering associated with exposure to extreme light (for
instance, shining a flashlight directly on the objective) should trigger an alarm.
The average brightness of the scene provides a basis for recognition.
Scene too dark
Activate this function if tampering associated with covering the objective (for
instance, by spraying paint on it) should trigger an alarm. The average bright-
ness of the scene provides a basis for recognition.
Scene too noisy
Activate this function if tampering associated with EMC interference (noisy
scene as the result of a strong interference signal in the vicinity of the video
lines), as an example, should trigger an alarm.
Reference check
You can save a reference image that is continuously compared with the current
video image. If the current video image in the marked areas differs from the ref-
erence image, an alarm is triggered. This allows you to detect tampering that
would otherwise not be detected, for example if the camera is turned.
– Click Reference to save the currently visible video image as a reference.
– Click Select area and select the areas in the reference image that are to be
monitored.
– Check the box Reference check to activate the on-going check. The stored
reference image is displayed in black and white below the current video
image, and the selected areas are marked in red.