Specifications

Operation Bosch Security Systems | 2006-03 | V2.0
EN | 98 Installation and Operating Manual | VIP X1600
Image selection
You can view the image from each camera individually on a full screen.
– Click one of the tabs Camera 1 ... Camera 4 above the video image to view
the corresponding camera image.
– Click Quad video above the video image to view all four video images.
– Click one of the tabs MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEG
below the video image to toggle between the different displays of the camera
images.
Camera control
The options for control of peripheral devices (for example a pan/tilt head or a
dome camera) are dependent on the unit type installed and on the configuration
of the VIP X1600.
If a controllable unit is connected and configured, the operating items for control-
ling the peripheral device can be seen to the left of the video image.
– To control a peripheral, click the appropriate controls.
– Move the mouse pointer over the video image. Additional options for control-
ling peripherals are displayed with the mouse pointer.