Spec Sheet

1 Quick Installation Guide
1 CD-ROM with software and documentation
1 Drilling template
1 Set of spring clamp contact connectors
An optional extended temperature range power supply
can be ordered separately with power cord versions
for the EU/US, UK, and AUS regions.
Technical specifications
Electrical
Power supply Via external unit or external battery
Input voltage 10 to 30 VDC
Power consumption X10: approx. 16 VA, fully equipped
X20/X40: approx. 22 VA, fully equipped
Input/output
Video X10: 1 x input
X20: 2 x input
X40: 4 x input
• connector BNC
• impedance 75 ohm, switchable
• signal Analog composite, 0.7 to 1.2 Vpp, NTSC or
PAL
Audio X10: 1 x mono line in, 1 x mono line out
X20/X40: 2 x mono line in, 1 x mono line
out
• connector 2 x 3.5 mm stereo jack
• signal line in 9 kohm typical, 5.5 Vpp max
• signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm
typical
Alarm 4 x input
• connector Clamp (non-isolated closing contact)
• activation
resistance
10 ohm max
Relay 4 x output
• connector Clamp
• signal 30 Vpp (SELV), 2 A
COM port Clamp, RS‑232/422/485
Video
Standards H.264 Baseline Profile (ISO/IEC 14496‑10)
MPEG‑4, M‑JPEG, JPEG
Data rates 9.6 kbps to 6 Mbps per channel
Resolution Horizontal x vertical PAL/NTSC
• 4CIF (MPEG‑4
only)
X10/X20: 704 x 576/480 (25/30 ips*)
X40: 704 x 576/480 (12.5/15 ips*; all
inputs used)
• 2CIF 704 x 288/240 (25/30 ips*)
• 2/3 D1 464 x 576/480 (25/30 ips*)
• 1/2 D1 352 x 576/480 (25/30 ips*)
• CIF 352 x 288/240 (25/30 ips*)
• QCIF 176 x 144/120 (25/30 ips*)
* Depending on encoding algorithm, picture
content and movement
GOP structure I, IP
Overall IP delay 120 ms
Frame rate 1 to 50/60 (PAL/NTSC)
Audio
Standard G.711; 300 Hz to 3.4 kHz
Data rate 80 kbps at 8 kHz sampling rate
Network
Ethernet Dual port 10/100 Base‑T, auto-sensing,
half/full duplex, RJ45
SFP 1 x 1 Gbps SFP (small form-factor
pluggable) slot for optional standard SFP
GBIC module
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, RTSP,
SMTP, SNTP, SNMP (V1, MIB‑II), 802.1x
Encryption TLS 1.0, SSL, AES (optional)
Control
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
Camera control Via serial interface;
supported* protocols and devices:
• Bosch Autodome, HSPT, MIC1-300 IP, TC8x00
• Canon VCC1, VC-C4R
• CBC SMD 12P/12PII/20P
• JVC TK-C676
• Panasonic WV-CS850
• Pelco Spectra D/P
• Sensomatic SpeedDome Ultra
• Sony EVI D30/31/D100
4 | VideoJet X10/X20/X40 Rugged Video Encoder