Operation Guide
Table Of Contents
- VideoJet X40
- Table of Contents
- 1 Preface
- 2 Safety Information
- 3 Product Description
- 4 Installation
- 5 Configuration Using a Web Browser
- 5.1 Connecting
- 5.2 Configuration Menu
- 5.3 Basic Mode: Unit Access
- 5.4 Basic Mode: Date/Time
- 5.5 Basic Mode: Network
- 5.6 Basic Mode: Encoder Profile
- 5.7 Basic Mode: Audio
- 5.8 Basic Mode: Recording
- 5.9 Basic Mode: System Overview
- 5.10 Advanced Mode: Identification
- 5.11 Advanced Mode: Password
- 5.12 Advanced Mode: Date/Time
- 5.13 Advanced Mode: Display Stamping
- 5.14 Advanced Mode: Appearance
- 5.15 Advanced Mode: LIVEPAGE Functions
- 5.16 Advanced Mode: Logging
- 5.17 Advanced Mode: Video Input
- 5.18 Advanced Mode: Picture Settings
- 5.19 Advanced Mode: Encoder Profile
- 5.20 Advanced Mode: Audio
- 5.21 Advanced Mode: Storage Management
- 5.22 Advanced Mode: Remote Video Device
- 5.23 Advanced Mode: Recording Profiles
- 5.24 Advanced Mode: Retention Time
- 5.25 Advanced Mode: Recording Scheduler
- 5.26 Advanced Mode: Recording Status
- 5.27 Advanced Mode: Alarm Connections
- 5.28 Advanced Mode: VCA
- 5.29 Advanced Mode: VCA Profiles
- 5.30 Advanced Mode: VCA Scheduled
- 5.31 Advanced Mode: VCA Event Triggered
- 5.32 Advanced Mode: Audio Alarm
- 5.33 Advanced Mode: Alarm E-Mail
- 5.34 Advanced Mode: Alarm Task Editor
- 5.35 Advanced Mode: Alarm Inputs
- 5.36 Advanced Mode: Relay
- 5.37 Advanced Mode: COM1
- 5.38 Advanced Mode: Network
- 5.39 Advanced Mode: Advanced
- 5.40 Advanced Mode: Multicasting
- 5.41 Advanced Mode: JPEG Posting
- 5.42 Advanced Mode: Encryption
- 5.43 Advanced Mode: Maintenance
- 5.44 Advanced Mode: Licenses
- 5.45 Advanced Mode: System Overview
- 5.46 Function Test
- 6 Operation
- 7 Maintenance and Upgrades
- 8 Appendix
- 9 Specifications
- 10 Glossary
- 11 Index
VideoJet X40 Appendix | en 113
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
8.4 LEDs
The VideoJet X40 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
Power On LED
SFP LED
ETH 1 LED
ETH 2 LED
Connect LED
HDD LED
Does not light up: VideoJet X40 is switched off.
Lights up green: VideoJet X40 is switched on.
Does not light up: No connection.
Lights up yellow: Connection established.
Flashes yellow: Data being transmitted.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Lights up red: Startup in progress.
Lights up green: Startup complete, VideoJet X40 is operational.
Flashes green: Video connection established.
Flashes red: VideoJet X40 is faulty, for example following failed
firmware upload.
Does not light up: No hard drive fitted.
Lights up orange: Hard drive fitted.
Flashes orange: Hard drive activity.