Installation manual

Bosch Security Systems | 2003-06
VSS7390/01T Switcher | Installation Manual | Chapter 2 EN | 7
Note
If the display is in sequence mode during an alarm, it
automatically returns to sequence mode, starting with
the next image after the alarm image.
Alarm Profile Day
Alarm Profile Night
The other options are the same as for the ALARM
PROFILE DAY.
Note
When the day/night switch function is activated the
day/night switch on the monitor and on the remote
control is deactivated.
MAIN MENU
SYSTEM SETTINGS
ALARMS
ALARM PROFILE DAY
EXIT DELAY 0 SEC
TITLE MOTION ALARM-BOX DOORBELL
1 OFF OFF OFF
2 OFF OFF ON
3 OFF OFF OFF
4 OFF OFF OFF
EXIT DELAY Alarm Exit Delay (0 sec. to 4
min.) is the amount of time
before the alarm profile night will
be activated. (For example, time
for a person to exit a room
before the night alarm profile is
activated after switching over
from day to night).
MOTION ON/OFF The camera detects
motion within the defined motion
area.
ALARM BOX ON/OFF An alarm box is an
optional accessory that enables
you to activate an alarm input
(e.g. PIR detector).
DOORBELL ON/OFF/REMOTE A doorbell
(Intercom Box) is an optional
accessory that enables you to
react to persons who enter by
pressing the respective door-
bell. Pressing the doorbell will
sound the system buzzer and
register an event. If ‘remote’
option is selected, the doorbell
also triggers the alarm output
contact of the monitor.
MAIN MENU
SYSTEM SETTINGS
ALARMS
ALARM PROFILE NIGHT
EXIT DELAY 0 SEC
DISPLAY ON
TITLE MOTION ALARMBOX DOORBELL
1 OFF OFF OFF
2 OFF OFF ON
3 OFF OFF OFF
4 OFF OFF OFF
ENTRY DELAY An alarm generated in night
mode will be processed by the
system after the entry delay time
has expired (programmable
between 0 sec. and 4 min.). If
the system is switched over
from night to day during the
entry delay time the alarm will
not be processed. Exceptions
are special alarms, like tamper
and system alarm, which will
always be processed.
DISPLAY ON/OFF/ON AT ALARM In
night mode, the monitor screen
display can be switched ON or
OFF. Selecting ‘ON AT ALARM’
switches the monitor screen on
if an alarm is activated and dis-
plays the image of the camera
that has been activated.
If there is no user activity, the
system will automatically switch
back to night mode display OFF
within 15 minutes. If there is
user activity, the user must
switch the display off by
pressng the Day/Night Switch.
DAY / NIGHT
SWITCH
None/Select camera line with
Alarm/Action box. When
selected, the day and night pro-
files can be activated from an
Alarm/Action box.