www.philipscsi.
Page English ........................................................................................................................................3 French........................................................................................................................................15 German ....................................................................................................................................27 Spanish ..................................................................
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER CONTENTS SECTION 1 GENERAL 1 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.1 IMPORTANT SAFEGUARDS VENTILATION . . . . . . . . . . CLEANING . . . . . . . . . . . . DISPOSAL . . . . . . . . . . . . . 1.1.1 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER SECTION 1 GENERAL 1 VENTILATION SAFETY PRECAUTIONS 20. Keep ventilation openings free to avoid the monitor for overheating. 21. Do not place the monitor in the immediate vicinity of a heating source. 22. Do not install this equipment in a confined space such as a bookcase or similar unit. CLEANING 23. You can clean the monitor with a moist fluff-free cloth or shammy leather 1.1 IMPORTANT SAFEGUARDS cloth. 1. Read these instructions.
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER SECTION 2 I N S TA L L AT I O N 2 HARDWARE INSTALLATION 2.2 2.2.1 Camera inputs (1 to 4) This chapter describes the installation of the system hardware. For details of operation, see the supplied Operation Instructions. The cameras are connected to inputs 1 through to 4, depending on the number of cameras used. Note: Ensure that you read all safety precautions. 2.1 SYSTEM CONNECTION 2.2.
P H I L I P S O B S E RVAT I O N S YS T E M n Connect the BNC connectors to the video in and video output of the VCR or CVBS monitor. n Connect the RCA plugs to the Audio in and Audio out of your VCR or CVBS monitor. VSS7390/00T SWITCHER 2.3 When the system is powered up the FIRST time, the WIZARD setup option is displayed. The Installation Wizard will guide you through the most important settings of the system. Follow the screen options and select using the ROTARY wheel. 2.2.
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER When completed the following screen will appear: 2.4.3 Sequence You can change the sequence dwell time from 02 sec to 30 secs. Sequence/dwell time is the length of time an image is displayed before the next image in the sequence is shown. C O N F I G U R AT I O N C O N F I G U R AT I O N W I Z A R D COMPLETED 2.4 SYSTEM SETTINGS MAIN MENU SYSTEM SETTINGS The system settings that can be configured to your own requirements.
P H I L I P S O B S E RVAT I O N S YS T E M MOTION The camera detects motion within the defined motion area. ALARM BOX An alarm box is an optional accessory that enables you to activate an alarm input (e.g. PIR detector). DOOR BELL VSS7390/00T SWITCHER 2.4.5 Aux output From the system settings menu you can configure the system aux-output. MAIN MENU SYSTEM SETTINGS A door bell (Intercom Box) is an optional accessory that enables you react to persons who enter by pressing the respective door bell.
P H I L I P S O B S E RVAT I O N S YS T E M SEQUENCE The presentation is sequenced with a live camera image when selected to ON. SEQUENCE WITH 2 Presentation is sequenced with the selected live camera image (in this case with camera number 2) DWELL TIME Change the image sequence dwell time (programmable between 02 and 30 secs) AUDIO SOURCE VSS7390/00T SWITCHER 2.4.7 Installation The Installation group contains all installation-related items, such as language, system beep and camera setting.
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER REMOTE CONTROL Can be selected ON or OFF to allow control of the system from the IR Remote Control accessory. SYSTEM ADDRESS Can be selected from an address of 1 to 8 to avoid multiple system switching with one IR Remote Control. CONTROL AT SLAVE AUTO - White balance is automatically set. RECALCULATE - Set the white balance to automatic for 5 seconds and then back to fixed.
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER 3. Walkthrough motion area (motion indicator indicates level of motion). 4. Set level just below the level of motion indication. 2.4.10 Disable System Setting Option You can disable the system setting option, ensuring operators do not make inadvertent system changes. 2.4.
Switch to playback view History View Settings Time and Date System Settings Main Menu 12 Sequence Alarms Aux - Output VCR Installation Service System Settings System Diagnose Factory Defaults Service Language Beep Volume External Control Setup Camera 1 ---------------------Setup Camera 4 Installation Playback Detection VCR Aux - Output Presentation Mode Presentation on Slave Sequence Sequence with Dwell Time Audio Source Aux Output Alarms Alarm Duration Alarm Profile Day Alarm Profile Night Even
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER SECTION 3 T E C H N I C A L S P E C I F I C AT I O N S APPROVALS AUX/VCR Safety Europe USA Australia EN60065 UL6500 UL & cUL listed C-Tick Electro Magnetic Compatibility (EMC) Europe USA Australia EN55022 Class B, EN50130-4 FCC part 15, class B AS/NZS 3548 ELECTRICAL Picture tube Video input BNC (1 Vpp, input impedance 75 Ohm) Audio input RCA (0.
P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER 14
3122 165 22151 01-17 © 2001 by Philips Electronics N.V. © 2001 by Philips Communication, Security & Imaging, Inc. All Rights Reserved. Philips® is a registered trademark of Philips Electronics N. A. Corp.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 1 www.philipscsi.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 2 Page English ........................................................................................................................................3 French........................................................................................................................................11 German ....................................................................................................................................21 Spanish ...........
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 3 P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER CONTENTS SECTION 1 - GENERAL 1 SAFETY PRECAUTIONS 1.1 IMPORTANT SAFEGUARDS VENTILATION . . . . . . . . . . CLEANING . . . . . . . . . . . . DISPOSAL . . . . . . . . . . . . . 1.1.1 FCC Information . . . . . . . . 1.2 Introduction . . . . . . . . . . . . 1.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 4 P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER SECTION 1 GENERAL 1 VENTILATION SAFETY PRECAUTIONS 20. Keep ventilation openings free to avoid the monitor for overheating. 21. Do not place the monitor in the immediate vicinity of a heating source. 22. Do not install this equipment in a confined space such as a bookcase or similar unit. CLEANING 23. You can clean the monitor with a moist fluff-free cloth or shammy leather 1.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 5 P H I L I P S O B S E RVAT I O N S YS T E M 1.2 VSS7390/00T SWITCHER INTRODUCTION Zoom function With the zoom function, the selected camera picture is zoomed x 2 and displayed as a full screen image. Playback detection When you switch on the VCR playback, the system will automatically detect the VCR and will display the VCR images.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 6 P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER SECTION 2 O P E R AT I O N 2 2.1 BASIC OPERATION A moon symbol is visible on the screen when you are in night mode. Operation and programming of the system is performed through On Screen Display (OSD) menus. With these easy to use menus you can setup the system to your own needs.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 7 P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER The talk function is only functional in combination with an intercom box (optional). 2.1.10 Picture-In-Picture (PIP) The PIP button toggles the Picture-In-Picture on/off. 2.1.5 Action Keeping the PIP button pressed while turning the rotary wheel will scroll through all connected cameras.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 8 P H I L I P S O B S E RVAT I O N S YS T E M VSS7390/00T SWITCHER The following view settings can be altered: 2.2.1 Switching between playback and live SWITCH TO You can switch between PLAYBACK VIEW playback view (looking at images from a VCR) or live view (looking at live camera images) 2.2.2 History The history table shows all events that have caused by an alarm, doorbell, motion or special alarm.
VSS7390_Switcher_Opml.qxd 11-Jun-01 1:14 PM Page 9 P H I L I P S O B S E RVAT I O N S YS T E M 2.3 VSS7390/00T SWITCHER ALARM FUNCTIONS 2.3.2 Recorded Alarms The alarm function can be enabled or disabled in the alarm profile. When motion is detected by a camera or when an alarm is triggered by an Action/Alarm box (optional), the alarm function is activated. During playback the recorded alarms will be visible.
VSS7390_Switcher_Opml.
VSS7390_Switcher_Opml.qxd 11-Jun-01 2:38 PM 3122 165 22161 01-17 Page 110 © 2001 by Philips Electronics N.V. © 2001 by Philips Communication, Security & Imaging, Inc. All Rights Reserved. Philips® is a registered trademark of Philips Electronics N. A. Corp.