Operation Manual

en Getting to know the appliance
10
Display panel
In the table you can find possible settings and information in the display panel; these
differ depending on the model.
Settings for the selected programme
- 90* Temperature in °C Temperature
- - - -, 0 - 1400* Spin speed in rpm
(revolutions per minute)
Maximum spin speed or - - - - (Rinse stop = without final spin,
washing remains in the water after the last rinse)
1:30 Programme length Depends on the programme selection in h:min (hours:min-
utes)
1 - 24 Finish in h (hours) End of programme after ... Hours
9.0* Load in kg Maximum load
* Depending on the model
Status indicators for the programme progress (programme sequence)
ß, à, 0, End Wash, rinse, spin/drain, programme end.
E Childproof lock Lights up: The childproof lock is active.
Flashes: The childproof lock is actived, and if the programme
selector has been adjusted or the buttons have been
pressed.
è Door lock Lights up: When the door can not be opened.
r Tap Lights up: Water pressure is too low. This extends the pro-
gramme duration.
Flashes: The tap has not been turned on or there is no water
supply.
Å Overdosage On if too much foam detected, one additional rinse cycle
switched on.
- - - - é* Power consumption.
* Depending on the model