Washing machine WAP...
Your new washing machine Display rules You have chosen a Bosch washing machine. : Warning! Please take a few minutes to read and become familiar with the advantages of your washing machine. This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Electrical safety. . . . . . . . . . . . . . . . . . 5 Risk of injury . . . . . . . . . . . . . . . . . . . . 5 Safety for children. . . . . . . . . . . . . . . . 5 7 Environmental protection . . . . . .7 Packaging/used appliance . . . . . . . . . 7 Tips on economical use . . . . . . . . . . . 7 * Getting to know the appliance . 8 Washing machine . . .
en Intended use Installation on a base or a wooden joist floor . . . . . . . . . . . . . . . . . . . . Installation on a platform with drawer . . . . . . . . . . . . . . . . . . . . . . Installing the appliance in a kitchenette . . . . . . . . . . . . . . . . . . . Removing the transport locks . . . . Hose and cable lengths. . . . . . . . . Water inlet . . . . . . . . . . . . . . . . . . . Water outlet . . . . . . . . . . . . . . . . . . Levelling . . . . . . . . . . . . . . . . . . . .
Safety instructions ( Safety instructions ■ Electrical safety Safetyinstrucions : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. ■ The appliance must be grounded. Electrical connection ~ Page 30 Risk of injury : Warning Risk of injury! When the washing machine is lifted by its protruding parts (e.g.
en Safety instructions : Warning Danger of death! Children may lock themselves in appliances, putting their lives at risk. For appliances that have reached the end of their service life: ■ Disconnect the mains plug. ■ Cut through the mains cable and remove it, along with plug. ■ Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate.
Environmental protection 7 Environmental protection Tips on economical use ■ Packaging/used appliance Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner. The following Do’s and Don’ts provide a framework for the return and recycling of used products when available in your area.
en Getting to know the appliance * Getting to know the appliance Washing machine Getingtoknwtheaplince # 6 ( 0 8 8 Detergent dispenser Control panel Door 7 9S Open the door 9T Close the door @ Service flap
Getting to know the appliance en Control panel You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. ( Programme default settings can be changed. Overview of all programme default settings ~ Page 13 0 additional programme settings can be selected. Overview of all additional programme settings ~ Page 14 8 Start button for starting, interrupting, (e.g. adding laundry) and cancelling a programme.
en Getting to know the appliance Display panel In the table you can find possible settings and information in the display panel; these differ depending on the model. Settings for the selected programme — - 90* Temperature in °C - - - -, 0 - 1400* Spin speed in rpm (revolutions per minute) 1:30 Programme length 1 - 24 Finish in h (hours) 9.
Laundry Z Laundry Prepare the laundry Laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine. Therefore, note the following tips when preparing your laundry: ■ Empty pockets. ■ ■ ■ ■ ■ ■ Look out for metal items (paperclips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). Close any zips, button up any cover buttons.
en Detergent C Detergent Correct selection of detergent Detrgn The care label is crucial to ensure correct detergent selection, temperature and laundry treatment. ■ ■ ■ ■ ■ Standard detergent with optical brighteners suitable for heat-resistant white washing made from linen or cotton Programme: i Cottons/ cold – max. 90 °C Detergent for colours without bleach or optical brighteners suitable for coloured washing made from linen or cotton Programme: i Cottons/ cold – max.
Programme default settings 0 Programme default settings Note: You can find possible programme default settings in the overview; these differ depending on the model. Progamedfault seings The programme default settings for all programmes are preset at the factory and are displayed in the display panel after the programme is selected. Temperature (Temp. °C) Depending on what stage the program is in, you can change the set temperature before and during the program.
en Additional programme settings \ Additional programme settings Note: You can find possible additional programme settings in the overview; these differ depending on the model. Adit onalprgamest ings SpeedPerfect/EcoPerfect (G F) Button with two possible settings for adapting the selected program: ■ ■ G SpeedPerfect Washing in a shorter time while achieving a washing result that is consistent with, but uses more energy than, the selected program, without the SpeedPerfect/EcoPerfect setting.
Operating the appliance 1 Operating the appliance Note: Install and connect washing machine properly. Before the 1st wash ~ Page 31 Operatingheaplince Preparing the washing machine Notes ■ Never switch on a damaged washing machine! ■ Inform customer service! 1. 2. 3. 4. Connect the mains plug. Turn on the tap. Open the door. Check that the drum is completely emptied. Empty if necessary.
en Operating the appliance Notes ■ Mix items of laundry of varying sizes. Laundry items of different sizes distribute themselves better during the spin cycle. Individual items of laundry may lead to imbalances. ■ Observe the specified maximum load. Overfilling has a negative impact on the washing result and promotes creasing. 1. Place presorted items of laundry unfolded in the washing drum. 2.
Operating the appliance 1. Pull out the detergent drawer as far as possible. 2. Add detergent and/or care products. 3. Close the detergent drawer. Measuring aid* for liquid detergent *Depending on the model Position the measuring aid for measuring the correct amount of liquid detergent: 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer. 2. Slide the measuring aid forwards, fold it down and click it into place. 3. Reinsert the drawer.
en Operating the appliance Adding/removing laundry Programme end during rinse hold Following the start of the program, you can add or remove laundry as required. Press the A button to do this. The A button indicator lamp flashes and the machine checks whether it is possible to add laundry. - - - - 0 appears in the display panel and the indicator lamp of the A button flashes. If the following appears in the display panel: ■ the è symbol disappears, and adding is possible.
Setting the signal M Setting the signal You can change the following settings: ■ The volume for the information signals (e.g. at the end of the program) and/or ■ The volume of the audible button signals. Setingthesignal Changing the volume Use the ñ Ready in//ñ Finished in + or - button to change the following settings at the corresponding program selector positions: ■ 2: The volume of the information signals and/or ■ 3: The volume of the button signals.
en Cleaning and maintenance 2 Cleaning and maintenance :Warning Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. Cleanigdmaintec : Warning Risk of poisoning! Toxic vapours can be produced by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents. Caution! Damage to the appliance Cleaning agents that contain solvents, e.g.
Cleaning and maintenance Allow the water to cool down. 1. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump. 2. Switch off the appliance. Disconnect the mains plug. 3. Open and remove the service flap. en 6. Place the service flap back on, lock it into place, and close it. Note: To prevent unused detergent from flowing straight into the drain during the next wash, pour 1 litre of water into compartment II and start the 0 Spin/Drain [ programme. 4.
en Faults and what to do about them. Filter in the water supply blocked First, reduce the water pressure in the supply hose: 1. Turn off the tap. 2. Select any program (except ' Rinse/Freshen up//Rinse// 0 Spin/Drain [). 3. Press the A button.Allow the program to run for approximately 40 seconds. 4. Turn the program selector to off position. Pull out the mains plug. 5. Clean the filter on the tap: Disconnect the hose from the tap. Clean the filter with a small brush. 6.
Faults and what to do about them. en Information on the display panel Display è r E:18 Cause/Remedy ■ Flashes fast + signal: The door was opened and the water level is too high. Close the door, continue the programme with A button or select 0 Spin/ Drain [ programme. ■ Flashes slowly: The door lock temperature is too high to open the door. Wait approx. 30 seconds until the door lock temperature cools down.
en Faults and what to do about them. Faults Cause/Remedy Water is not visible in the Not a fault – the water is below the visible area. drum. The spin result is not ■ Not a fault – the unbalanced load detection system has interrupted the spin satisfactory. cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. Laundry is wet/too damp.
After-sales service 4 After-sales service If you cannot correct the fault yourself, (see section, Faults and what to do about them ~ Page 22), please contact our after-sales service. We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Please give the after-sales service the product number (E no.) and the production number (FD) of the appliance.
en Positioning and connecting 5 Positioning and connecting Included with the appliance Posit onigadconetig Note: Check the machine for transport damage. Never use a damaged machine. If you have any complaints, contact the dealer from whom you purchased the appliance or our Customer Service.
Positioning and connecting Caution! Water damage The connection points for the water supply hose and water drain hose are under high water pressure. To prevent leaks and water damage, you must follow the instructions in this section. Notes In addition to the safety information listed here, the local water and electricity supplier may have special requirements. ■ If in doubt, have the appliance connected by a specialist.
Positioning and connecting 1. Take the hoses out of the holders. 2. Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. 3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks. ■ Right-hand connection PD[ FP en *Depending on the model Tip: The following are available from specialist dealers/the after-sales service: ■ An extension for Aqua-Stop or cold water supply hose (approx. 2.
Positioning and connecting Optimum water pressure in the supply network At least 100 kPa (1 bar) Maximum 1000 kPa (10 bar) When the tap is open, the water flow is at least 8 l/min. If the water pressure is higher than this, a pressure-reducing valve must be installed. Connection 1. Connect the water supply hose to the water tap (¾" = 26.4 mm) and to the appliance: – Model: Standard en 2. Open the water tap carefully, checking the leak tightness of the connection points.
en ■ ■ Positioning and connecting Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers). Outlet into a plastic pipe with rubber bushing or into a drainage pit Electrical connection : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it.
Positioning and connecting Before washing for the first time Transportation The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose. Maintenance – filter in the water supply ~ Page 22 3. Drain the remaining detergent solution. Maintenance – detergent solution pump blocked ~ Page 20 4.
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.