Washing machine WAW28420AU en Instruction Manual and Installation Instructions
Your new washing machine Display rules You have chosen a Bosch washing machine. : Warning! Please take a few minutes to read and become familiar with the advantages of your washing machine. This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..5 ..6 ..9 . 10 7 Environmental protection . . . . .12 Packaging/used appliance . . . . . . . . 12 Tips on economical use . . . . . . . . . .
en Intended use Q Appliance settings . . . . . . . . . . 41 Activating the setting mode . . . . . . . Changing the signal volume . . . . . . Selecting/deselecting the appliance automatic switch-off . . . . . . . . . . . . . Exiting setting mode . . . . . . . . . . . . 41 41 41 41 8 Intended use ■ Intedus ■ H Sensors . . . . . . . . . . . . . . . . . . . 42 Automatic load sensing . . . . . . . . . . 42 Unbalanced load detection system . 42 AquaSensor . . . . . . . . . . . . . . . . . . .
Safety instructions ( Safety instructions The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings. It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.
en Safety instructions : Warning Risk of suffocation! If allowed to play with the packaging/plastic film or packing components, children may become caught in these or pull them over their heads and suffocate. Keep packaging, plastic film and packing components away from children. Installation : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance is not installed properly, this may lead to a dangerous situation.
Safety instructions ■ ■ The mains plug must be freely accessible at all times. If this is not possible, in order to comply with the relevant safety regulations, a switch (all pole disconnection) must be built into the permanent installation in accordance with electrical installation regulations. If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
en Safety instructions : Warning Risk of injury! ■ The appliance is very heavy. Lifting it may result in injury. Do not lift the appliance on your own. Risk of inThe jury! ■ appliance has sharp edges on which you could cut your hands. Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it. Risk of inIfjury! the hoses and mains ■ cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.
Safety instructions Operation : Warning Risk of explosions/fire! Laundry that has been pretreated with cleaning agents that contain solvents, e.g. stain remover/cleaning solvent, may cause an explosion in the drum. Rinse the laundry thoroughly with water before washing it in the machine. : Warning Risk of poisoning! Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents.
en Safety instructions Caution! Material damage/damage to the appliance ■ If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not exceed the maximum load capacity of dry laundry. Make sure you comply with the maximum load capacities specified for each of the programs.
Safety instructions en : Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only. Caution! Material damage/damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.
en Environmental protection 7 Environmental ■ protection Packaging/used appliance Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Positioning and connecting 5 Positioning and connecting Included with the appliance Posit ongadconetig Note: Check the machine for transport damage. Never use a damaged machine. If you have any complaints, contact the dealer from whom you purchased the appliance or our customer services.
en Positioning and connecting Safety instructions Installation surface : Warning Risk of injury! ■ The washing machine is very heavy. Be careful when lifting/transporting the washing machine. ■ When the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off and cause injuries. Do not lift the washing machine by protruding parts. ■ If the hose and mains cables are not routed properly, there is a risk of tripping and injury.
Positioning and connecting Installing the appliance in a kitchenette en 1. Take the hoses out of the holders. : Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Notes ■ Recess width of 60 cm required. ■ Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets. 2. Unscrew and remove all four transportation securing bolts with a wrench (WAF 13). Remove the sleeves.
Positioning and connecting en Hose and cable lengths Left-hand connection ■ a FP PD[ FP a FP Right-hand connection a FP a FP a FP PD[ FP ■ a FP Tip: The following are available from specialist dealers/customer services: ■ Extension for Aqua-Stop and cold water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 ■ A longer supply hose (approx. 2.
Positioning and connecting Water inlet : Warning Danger of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Notes Only operate the washing machine using cold mains water. ■ Do not connect the machine to the mixer tap of an unpressurised hotwater boiler. ■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
en Positioning and connecting Water outlet : Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). Do not reach into the hot water. Caution! Water damage If the drain hose slips out of the washbasin or the connection point during draining due to high water pressure, any escaping water may cause water damage. Secure the drain hose so that it cannot slip out.
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". 1. Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. 2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet. All four appliance feet must stand firmly on the ground. 3.
en Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes ■ The washing machine must be correctly installed and connected. From ~ Page 13 ■ Never use a machine if it is damaged. Inform the after-sales service. Preparatory work: 1. Check the machine. 2. Remove the protective film from the control panel. 3.
Positioning and connecting Transportation E.g. when moving house Preparatory work: 1. Turn off the tap. 2. Reduce the water pressure in the supply hose: ~ Page 45; Cleaning and maintenance – filter in the water supply blocked 3. Disconnect the washing machine from the mains. 4. Drain the remaining water: ~ Page 44; cleaning and maintenance – the drain pump is blocked, emergency draining 5. Remove the hoses. en Before switching on the appliance again: Notes ■ The transport braces must be removed.
en Main points in brief Y Main points in brief Mainpotsinbref 1 @ Connect the mains plug. Turn on the tap. -------- 2 @ Open the door. @ @ To switch on, press the # button. @ Select a programme, e.g. i Cottons. @ FODFN Sort the laundry. -------- 3 @ Add detergent. -------- 4 22 Close the door. @ If necessary, change the default programme settings and/or select additional settings. @ End of the programme -------- Load the laundry.
Getting to know the appliance en * Getting to know the appliance Washing machine Getingtoknwtheaplince # 6 ( 0 8 9S 9T @ 7 Detergent drawer ~ Page 37 Operating/display panel Door with door handle Open the door Close the door Service flap 23
en Getting to know the appliance Control panel Note: All the buttons are sensitive (except for the main switch) and only need to be pressed lightly. ( Main switch for switching the washing machine on and off: Press the # button. 0 Programme selector for selecting a programme. Overview of programmes ~ Page 28 8 Additional programme settings: ~ Page 35 ■ EcoPerfect F, ■ SpeedPerfect (, ■ Rinse Plus ', ■ Easy Iron p @ A button for: ■ Starting a programme ■ Interrupting a programme, e.g.
Getting to know the appliance Display panel en Further information Programme progress: Default programme settings: ( Temperature sin °C Ž - 90 (Ž = cold) 0 Spin speed in rpm, $ - 1600*; * Max. spin speed, depending on the selected programme and model, $ = Rinse Stop ~ Page 34 8 Finished in ñ time e.g. 2:30; Programme duration depends on the programme selection in h:min (hours:minutes), ■ Preselection of end time 1 - 24 h; Programme ends after ... h (h = hours) ■ Load recommendation e.g.
en Laundry Z Laundry Prepare the laundry Laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paperclips, needles, nails) may damage the laundry or components in the washing machine. You should therefore note the following tips when preparing your laundry: ■ Empty any pockets. ■ ■ ■ ■ ■ ■ Look out for metal items (paperclips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). Close any zips; button up any cover buttons.
Detergent C Detergent Correct selection of detergent Detrgn The care label is crucial for selecting the correct detergent, temperature and treatment of the laundry. ~ See also www.sartex.ch If you visit www.cleanright.eu, you will find further information on detergents, care products and cleaning agents for domestic use. ■ ■ ■ ■ ■ Standard detergent with optical brighteners Suitable for boil-washable white laundry made from linen or cotton Programme: Cottons/ cold - max.
en Overview of programmes / Overview of programmes Programmes on the programme selector Overiwofprgames Programme/type of laundry/information Settings Programme name Brief explanation of the programme and for which fabrics it is suitable. Max.
Overview of programmes Programme/type of laundry/information Settings o Mix Mixed load of cottons and synthetic fabrics Max. 4 kg en Ž - 40 °C $ - 1600** rpm EcoPerfect F, SpeedPerfect (, Easy Iron p, Rinse Plus ' “ Delicates / Silk For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blends (e.g. silk blouses, silk scarves) Note: . Use a detergent suitable for machine-washing delicates or silk. Max.
en Overview of programmes Programme/type of laundry/information Settings *** Û Drum Clean Programme for cleaning and caring for the drum and the outer tub, e.g. before running the first wash cycle, if washing frequently at a low temperature (40 °C or lower) or if an odour has developed after a prolonged period of non-use. The Û Drum Clean indicator lamp flashes when you have not used a programme of 60 °C or higher for a long time. Notes ■ Run the drum-care programme without any laundry.
Overview of programmes Programme/type of laundry/information Settings *** ; Allergy Plus Hard-wearing fabrics made of cotton or linen Note: . Particularly suited to washing items that need to be hygienically clean and especially kind to sensitive skin thanks to the longer wash cycle at a defined temperature, higher water level and longer spin cycle. Max.
en Overview of programmes Programme/type of laundry/information Settings *** S Night wash Especially quiet programme for washing during the night; suitable for cotton, linen, synthetic and blended fabrics. Notes ■ Final buzzer deactivated. ■ Reduced final spin speed set by default and shorter washing time Max. 4 kg *** Quilts Machine-washable items stuffed with synthetic fibres, such as pillows, quilts and bedspreads; also suitable for items stuffed with down Note: . Wash large items separately.
Overview of programmes en Starching Note: Laundry should not be treated with fabric softener. Liquid starch can be used to stiffen fabrics particularly in the Rinse and Cottons programmes. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary). Dyeing/bleaching Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine to bleach clothes.
en Programme default settings 0 Programme default settings The default programme settings are displayed in the display panel after selecting the programme. You can change the default settings. An overview of all programme settings, which can be selected depending on the programme, can be found from ~ Page 28. Progamedfault seings Temperature s Depending on what stage the programme is in, you can change the set temperature before and during the programme.
Additional programme settings en \ Additional programme settings An overview of all additional settings, which can be selected depending on the programme, can be found from ~ Page 28. Adit onalprogamest ings EcoPerfect F Energy-optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected programme, without the EcoPerfect F setting.
en Operating the appliance 1 Operating the appliance Preparing the washing machine Operatingheaplince Note: The washing machine must be correctly installed and connected. From ~ Page 13. 1. 2. 3. 4. Connect the mains plug. Turn on the tap. Open the door. Check that the drum is completely drained. Drain if necessary.
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine. Do not allow these agents to come into contact with the surfaces of the washing machine. If necessary, immediately wipe away spray residue and other residues/ droplets with a damp cloth.
en Operating the appliance For models without a measuring aid, pour the liquid detergent into the appropriate dispenser and place it in the drum. Change the programme default settings You can use or change the default settings for this washing cycle. To do this, repeatedly press the corresponding button until the required setting is displayed. Note: Pressing and holding the button automatically runs through the set values to the end.
Operating the appliance en Adding laundry Cancel the programme After starting the programme, you can add or remove laundry if necessary. Press the A button to do this. The A button indicator lamp flashes and the machine checks whether it is possible to add laundry. For programmes at high temperatures: 1. Press the A button. 2. To cool down laundry: Select O Rinse. 3. Press the A button.
en Operating the appliance Removing laundry/switching off the appliance 1. Open the door and remove the laundry. 2. Press the # button. The appliance is switched off. 3. Turn off the tap. Note: Not required for Aqua-Stop models. Notes Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item. ■ Remove any foreign objects from the drum and the rubber seal – risk of rusting. ■ Wipe the rubber seal dry.
Appliance settings Q Appliance settings You can change the following settings: ■ The volume of the buttons and information signals (e.g. at the end of the programme) ■ Select/deselect the appliance's automatic switch-off function. ~ Page 12 Apliancest ings You will need to activate the setting mode in order to change these settings. 3RVLWLRQV Activating the setting mode 1. Press the # button. The appliance is switched on and the i Cottons programme is shown at position 1. 2.
en Sensors H Sensors Automatic load sensing Sensor Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning.
Cleaning and maintenance 2 Cleaning and maintenance :Warning Machine housing/control panel ■ Cleanigdmaintec Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and pull out the mains plug. en ■ ■ Wipe the housing and the control panel with a soft, damp cloth. Remove the detergent residue immediately. Do not clean with a water jet. Drum : Warning Use chlorine-free cleaning agents, do not use steel wool.
en Cleaning and maintenance Detergent drawer and housing If the washing machine contains detergent or fabric softener residues: 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer. 2. To remove the insert: Push the insert upwards from below with your finger. 3. Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well. 4. Fit the insert and lock it in place (push the cylinder onto the guide pin). 5.
Cleaning and maintenance Note: To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the [ Drain programme. en Then clean the filter: 1. Disconnect the hose from the tap. Clean the filter with a small brush. The drain hose at the siphon is blocked 1. Switch off the appliance. Pull out the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. 3.
en Faults and what to do about them. 3 Faults and what to do about them. Emergency release uFaltsandwht odabut hem. E.g. in the event of a power cut The programme continues when the power supply is restored. However, if the laundry has to be removed, the washing machine door can be opened as follows: : Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water and laundry. If possible, leave it to cool down first.
Faults and what to do about them. en Information on the display panel Display Cause/Remedy - P - and ÿ The door is unlocked. It is possible to add laundry. -P- ■ ■ ÿ flashes ■ ■ ■ r lights up ■ ■ ■ E:18 ■ ■ The temperature is too high. Wait until the temperature drops. The water level is too high. It is not possible to add laundry. Close the door immediately, if necessary. Press the A button to continue the programme. Laundry may be caught. Open and close the door again and press the A button.
en Faults and what to do about them. Faults and what to do about them. Faults Water is leaking from the machine. The machine is not filling with water. Detergent is not being dispensed. The door cannot be opened. Cause/Remedy ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The programme will not start. ■ ■ ■ The drum briefly jerks or judders after the programme has started. The water is not draining. ■ ■ The spin result is not satisfactory. Laundry is wet/too damp. The programme is taking longer than usual.
Faults and what to do about them. en Faults Cause/Remedy Odours in the washing machine. Run the Û Drum Clean 90 °C programme without laundry. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half of the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for woollens or delicates. The Å symbol lights up in the display panel. Foam may also be leaking from the detergent drawer.
en After-sales service 4 After-sales service If you cannot rectify a fault yourself, contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Please give customer services the product number (E no.) and the production number (FD) of the appliance. After-sal ervic ( 1U E no.
Consumption rates en [ Consumption rates Energy and water consumption, programme duration and residual moisture for the main washing programmes Consumptionrates (approximate values) Programme Load Energy Water Programme consumption* consumption* duration* i Cottons 20 °C 9 kg 0,35 kWh 70 l 3]h i Cottons 40°C 9 kg 1,25 kWh 70 l 3^h i Cottons 60°C 9 kg 1,20 kWh 70 l 3h 9 kg 0,74 kWh 77 l 5_h i Cottons 90°C 9 kg 2,60 kWh 80 l 3h f Easy Care 40 °C 4 kg 0,80 kWh 65 l 2h o Mix
en Technical data J Technical data Technical data cTehnialdt Dimensions: 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A Nominal power 1900 – 2300 W Water pressure: 100 - 1000 kPa (1 - 10 bar) Power consumption when switched off: 0,12 W Power consumption when left on: 0,43 W 52
Technical data en Information for test institute Items Pre-treatment of new appliance According to standard Washing programme Testing instructions Age of test loads Loading Procedure No. of Layers External circle Layer1 Layer2 Layer3 Layer4 Layer5 Instruction Run two empty runs of i Cottons 90 °C with 1400 rpm: The 1st run with 50g detergent and 8g anti sudsing agent, the 2nd run without detergent and sudsing agent. AS NZS 2040.1-2005 AS NZS 2040.
en Aqua-Stop warranty r Aqua-Stop warranty Only for appliances with Aqua-Stop Aqua-Stopwarnty In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused. 2. The liability guarantee is valid for the service life of the appliance. 3.
6
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.
