How to Guide

6
Step 2.1: Automatically connecting your home appliance
to your home network (Wi-Fi)
Press and hold the Remote start button for 3 seconds.
Aut (connect automatically) will appear on the display.
Press the
Start/Pause button to start the connection process.
Activate the WPS function on your home network router within the next 2 minutes.
(Some routers have a WPS/Wi-Fi button, for example. You will nd information about this in
the manual for your router.)
WPS
If the connection is successful, con (connected) will appear on the display and the symbol
will light up and remain lit.
Now go on to Step 3.
Err (error) appears on the display.
The connection could not be established within 2 minutes.
Check whether your home appliance is within range of your home network (Wi-Fi) and repeat the process if necessary,
or refer to Step 2.2 to connect the appliance manually.
?
A
B
en-us_PLC_Wascher_P_UL_control_BO_9001293507.indd 6 21.06.17 06:41