Instruction manual

Faults and what to do about them. en

The display panel/

indicator lights do not

work while the appliance

is running.

■ Has there been a power failure?

■ Have the fuses blown/has the circuit breaker tripped? Switch on the

circuit breaker/replace the fuses.

■ If the fault occurs repeatedly, call the after-sales service.

There is detergent

residue on the laundry.

■ Some phosphate-free detergents contain water-insoluble residue.

■ Select ' Rinse or brush the laundry after washing.

- P - appears on the

display panel when the

cycle is paused.

■ The water level is too high. It is not possible to add laundry. Close the door

immediately, if necessary.

■ Press the A button to resume the programme.

- P - and ÿ appear on the

display panel when the

cycle is paused.

The door is unlocked. It is possible to add laundry.

If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is

required:

■ Switch off the appliance and pull the mains plug out of the socket.

■ Turn off the tap and call the after-sales service.

Faults Cause/remedy