Instruction manual/ program table
3 4
Sort and load the laundry
Follow manufacturers care information!
Sort according to the information on the care labels.
Sort according to type, colour, level of soiling and temperature.
Do not exceed the maximum load a Page 1.
Observe the instructions in the Important information section a Page 5!
Load both large and small items of washing together!
Close the washing machine door
Take care not to trap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate amount according to:
Amount of laundry, level of soiling, water hardness (ask your water supply
company) and manufacturers instructions.
Pour liquid detergent into the appropriate dispenser.
During operation: take care when opening the detergent drawer!
Set the programme
For detailed programme informaton , see programme overviewapage 7.
Select additional functions
For additional options , see the function instruction a page 6.
Press the Start/Soaking $ button
The 1 indicator light is on, the programme starts.
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
L ॕ º
The machine was tested before leaving the factory.To remove any water
left over from testing procedures, the first washing cycle should be
carried out without any laundry in the machine a Page 5.
$
Washing
~
ʋ
ʋ
ʋ
ʋ
Dilute viscous fabric softener and fabric conditioner with water. This
prevents blockages.
ʑ
2
º
ʑ
1
2
Å
L ॕ
L
ॕ
L ॕ
L ॕ
L
ॕ
º
I ॕ
1 ॕ
ॕ
O: ॕ
Maintenance cover
Controlpanel
Door handle
Drum
Detergent drawer
with dispenser II, ~, I
4
5
6
Removing the laundry
Open the washing machine door and remove the laundry.
Leave the door and detergent drawer open to allow the
interior of the machine to dry.
Turn off the tap
Switch off
Set Programme selector to Off.
Programme ended when ...
The indicator light flashes.
Changing the programme ...
If you have accidentally selected the wrong programme:
Turn the programme selector to a newly selected
programme. The 1 indicator light flashes.
If required, select additional functions.
Press the Start/Soaking $ button, new programme
starts.
Soaking programme ...
The soaking function of machine can achieves a better
cleaning result by using considerably less energy.
After programme start 10 minutes and the laundry have
been soaked through equably, press the S
tart/Soaking
$ button, the programme is paused, start to soak.
The soaking duration is suggested not to less than 30
minutes.
Press the S
tart/Soaking $ button after finish the
soaking, the programme is continued.
Programme S
uper 18 min is not recommended to
use the soaking function.
... or terminate the progarmme
If you would like to terminate a programme:
Turn the programme selector to S
pin Å.
The 1 indicator light flashes.
Press the S
tart/Soaking $ button.
The 1 indicator light stop flashing, the Å indicator light
is on.
Remove the laundry after the spinning cycle.
1
2
3
7
8
9
10
ॕ
ॕ
I ॕ
$