Instruction manual/ program table

ॕ

~
L
ॕ

L
ॕ

L
ॕ

OÇ
ॕ

ॕ

I
ॕ

1
ॕ

 ॕ

2
Å

a
Å
Å
$
ʑ
a
ʑ
ʑ
ʑ
11
What to do if ...
ʑ
Water is running out.  Fit/refit drainage hose.
 Tighten screwfitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
The 1 and Å indicator lights flash.
 Tap not open?
 Filter blocked? Clean filter a Page 9.
 Water inlet hose kinked or jammed?
ʑ
Washing machine door cannot be
opened.
 Safety function active. Programme stopped?
 Water in drum? Select Spin Å.
ʑ
Programme does not start.
The 1 and 2 indicator lights
flash.
 Start/Soaking $not selected.
 Washing machine door not closed properly.
ʑ
Detergent solution is not drained.
The
2 and Å indicator lights
flash.
 Clean detergent solution pump a Page 9.
 Clean outlet pipe and/or drainage hose.
ʑ
Additional function could not
activate for selected programme.
 Can the additional function be selected? a Page 7,
programme overview.
ʑ
Water not visible in the drum.  Not a fault - water below the visible area.
ʑ
Spin cycle actuated several times.  Not a fault - unbalanced load detection system adjusts
imbalance.
ʑ
Detergent in chamber I is not
washed away.
 60 ॕ +Prewash programme not selected ?
ʑ
Detergent residue in the detergent
dispenser
 Detergent is damp or lumpy, clean the detergent
dispenser a Page 8.
 Use the dosing aid for liquid detergent.
ʑ
Foam is coming out of the
detergent drawer.
 Too much detergent used?
Mix 1 tablespoon of fabric conditioner with ½ a litre of
water and pour into dispenser II in the detergent drawer.
 Reduce detergent dosage for the next wash cycle.
ʑ
Excessive noise, vibrations and
wandering during spin cycle.
 Appliance feet fixed?
Secure appliance feet a Installation instructions.
 Transportation bolt removed?
Remove transportation bolt a Installation instructions.
ʑ
Indicator lights do not function
while the appliance is running.
 Power failure?
 Circuit breaker tripped? Reset the circuit breaker/
change the fuse.
 If the fault occurs repeatedly, contact customer service.
ʑ
Programme sequence longer than
usual
 Not a fault-unbalanced load detection system is
adjusting the imbalance by repeatedly distributing the
laundry .
 Not a fault - foam detection sysytem active.
ʑ
Detergent residues on the laundry  Occasionally, phosphate-free detergents contain water-
insoluble residues.
 Select Rinse  or blush the laundry after washing.
ʑ
Washing result not satisfactory  Soiling is greater than expected? Select a suitable
programme and press the Intensive ºbutton or reduce
load.
 Detergent is underdosed?
ʑ
If you cannot correct a fault yourself or a repair is required:
 Set the programme selector to Off and pull the mains plug out of the socket.
 Turn off the tap and call the customer services.
Washing machine WAX14060IN
en Instruction manual