Washing machine WAY32891AU en Instruction Manual and Installation Instructions
Your new washing machine Display rules You have chosen a Bosch washing machine. : Warning! Please take a few minutes to read and become familiar with the advantages of your washing machine. This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .5 ( Safety instructions . . . . . . . . . . .6 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6 ..7 . 10 . 11 7 Environmental protection . . . . .13 Packaging/used appliance . . . . . . . . 13 Tips on economical use . . . . . . . . . .
en Changing the programme . . . . . . . . Cancel the programme . . . . . . . . . . Programme end during rinse hold . . Programme end. . . . . . . . . . . . . . . . Removing laundry/switching off the appliance . . . . . . . . . . . . . . . . . . . . . 46 46 46 46 47 a Intelligent dosing system. . . . . 48 Intelligent dosing system in the detergent drawer . . . . . . . . . . . . . Initial use/filling the dispensers . . Everyday use . . . . . . . . . . . . . . . . Base dosage . . . . . . . . . . . . . . . .
Intended use en 8 Intended use ■ Intedus ■ ■ ■ ■ This appliance is intended for private domestic use only. Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst. This appliance must only be used for washing domestic laundry, consisting of machine-washable items and hand-washable woollens (see label on item).
en Safety instructions ( Safety instructions The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings. It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.
Safety instructions : Warning Risk of suffocation! If allowed to play with the packaging/plastic film or packing components, children may become caught in these or pull them over their heads and suffocate. Keep packaging, plastic film and packing components away from children. Installation : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance is not installed properly, this may lead to a dangerous situation.
en ■ Safety instructions If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations. : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance's mains cable is altered or damaged, this may result in electric shock, short circuiting or fire due to overheating.
Safety instructions : Warning Risk of injury! ■ The appliance is very heavy. Lifting it may result in injury. Do not lift the appliance on your own. Risk of inThe jury! ■ appliance has sharp edges on which you could cut your hands. Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it. Risk of inIfjury! the hoses and mains ■ cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.
en Safety instructions Operation : Warning Risk of explosions/fire! Laundry that has been pretreated with cleaning agents that contain solvents, e.g. stain remover/cleaning solvent, may cause an explosion in the drum. Rinse the laundry thoroughly with water before washing it in the machine. : Warning Risk of poisoning! Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents.
Safety instructions Caution! Material damage/damage to the appliance ■ If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not exceed the maximum load capacity of dry laundry. Make sure you comply with the maximum load capacities specified for each of the programs.
en Safety instructions : Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only. Caution! Material damage/damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.
Environmental protection water consumption in the selected programmes. The more display segments are visible, the higher the respective consumption. This enables you to compare the consumption levels of the different programmes when choosing your programme settings and decide on an energy- and water-saving programme setting. 7 Environmental protection Packaging/used appliance Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner.
en Positioning and connecting 5 Positioning and connecting Included with the appliance Posit onigadconetig Note: Check the machine for transport damage. Never use a damaged machine. If you have any complaints, contact the dealer from whom you purchased the appliance or our customer services.
Positioning and connecting en Safety instructions Installation surface : Warning Note: The washing machine be stable so that it does not move around. ■ The installation surface must be firm and level. ■ Soft floors/floor coverings are not suitable. Risk of injury! ■ The washing machine is very heavy. Be careful when lifting/transporting the washing machine. ■ When the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off and cause injuries.
en Positioning and connecting Installing the appliance in a kitchenette : Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Notes ■ Recess width of 60 cm required. ■ Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets. 1. Take the hoses out of the holders. 2. Unscrew and remove all four transportation securing bolts with a wrench (WAF 13). Remove the sleeves.
Positioning and connecting en Hose and cable lengths ■ Left-hand connection a FP PD[ FP a FP Right-hand connection a FP a FP a FP PD[ FP ■ a FP Tip: The following are available from specialist dealers/customer services: ■ Extension for Aqua-Stop and cold water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 ■ A longer supply hose (approx. 2.
en Positioning and connecting Water inlet : Warning Danger of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Notes ■ Only operate the washing machine using cold mains water. ■ Do not connect the machine to the mixer tap of an unpressurised hotwater boiler. ■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
Positioning and connecting Water outlet Connection : Warning ■ en Drainage into a washbasin Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). Do not reach into the hot water. Caution! Water damage If the drain hose slips out of the washbasin or the connection point during draining due to high water pressure, any escaping water may cause water damage.
en Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". 1. Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. 2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet. All four appliance feet must stand firmly on the ground. 3.
Positioning and connecting Electrical connection ■ : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. ■ Never unplug the mains plug during operation. ■ ■ en The mains plug can be accessed at all times.
en Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes ■ The washing machine must be correctly installed and connected. (from ~ Page 14) ■ Never use a damaged machine. Inform the after-sales service. Preparatory work: 1. Check the machine. 2. Fill the dispenser ß and i. ~ Page 48 3.
Positioning and connecting en Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g. due to damage to the electronics. Empty the dispensers before transporting the appliance. Preparatory work: 1. Turn off the tap. 2.
en Main points in brief Y Main points in brief Mainpotsinbref 1 @ Plug into the mains. Turn on the tap. -------- 2 @ Open the washing machine door. Sort the laundry. -------- 3 If required, change the programme settings of the selected programme and select programme settings/options. @ @ 'RVDJH DXWRPDWLF 3OHDVH ORDG ODXQGU\ PD[ NJ Load the drum. öüü Observe the maximum load (depending on the model) on the display panel.
Getting to know the appliance en * Getting to know the appliance Washing machine Getingtoknwtheaplince # 6 7 Detergent drawer with illuminated displays for the iDOS dispenser on the drawer handle ~ Page 48 0 Operating/display panel 8 Loading door with door handle 9S Open the loading door 9T Close the loading door ( @ Service flap 25
en Getting to know the appliance Control panel Note: All the buttons are sensitive (except for the main switch) and only need to be pressed lightly. AU Main switch for switching the washing machine on and off: Press the # button. 0 Programme selector for selecting a programme. The programme selector can be turned in either direction.
Getting to know the appliance en Display panel Main menu after selecting the programme e.g. Easy Care The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. & K " " 9 Ñ 9 Additional programs Programmes selected and select, for example, the Spin programme: Using the buttons below the arrows, you can select the required programme. The selection is acknowledged by a tick.
en Getting to know the appliance Options button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two lefthand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel. & 5LQVH +ROG K RQ Wait or go back to the main menu by pressing the Options button. basic settings 3 sec. buttons selected Change the appliance setting: e.g.
Laundry Z Laundry Prepare the laundry Laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paperclips, needles, nails) may damage the laundry or components in the washing machine. You should therefore note the following tips when preparing your laundry: ■ Empty any pockets. ■ ■ ■ ■ ■ ■ Look out for metal items (paperclips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). Close any zips; button up any cover buttons.
en Detergent C Detergent Correct selection of detergent Detrgn The care label is crucial for selecting the correct detergent, temperature and treatment of the laundry. ~ See also www.sartex.ch If you visit www.cleanright.eu, you will find further information on detergents, care products and cleaning agents for domestic use. ■ ■ ■ ■ ■ 30 Standard detergent with optical brighteners Suitable for boil-washable white laundry made from linen or cotton Programme: Cottons/ cold - max.
Overview of programmes en / Overview of programmes Programmes on the programme selector Overiwofprgames Programme/type of laundry/instructions Settings Name of the programme Brief explanation of the programme and the fabrics for which it is suitable. Max.
en Overview of programmes Programme/type of laundry/instructions Settings Mix Mixed load of cottons and synthetic fabrics Max. 4 kg Ž - 40 °C 0 - 1600** rpm ¦, (, x, T, Ï, Z, p, %, $, Á Detergent è, fabric softener è Delicates / Silk Delicate, washable items, e.g. made of silk, satin, synthetic or blended fabrics (e.g. silk blouses, silk scarves) Note: . Use a detergent that is suitable for machine-washing delicate fabrics or silk. Max.
Overview of programmes Programme/type of laundry/instructions Settings Kidswear * Hard-wearing items, heat-resistant items made of cotton or linen; energy-optimised washing that works by reducing the temperature while achieving a comparable washing result to the Cottons programme. Note: . The washing temperature is lower than the selected temperature. If you want to achieve a higher water temperature, use the Cottons programme with a higher temperature as required. Max.
en Overview of programmes Programme/type of laundry/instructions Settings Night Wash * Particularly quiet programme for washing overnight; suitable for items made from cotton, linen, synthetic or blended fabrics Notes ■ End signal deactivated, ■ reduced final spin speed set by default and shorter washing time Max. 4 kg Quilts / Duvet * Machine-washable items stuffed with synthetic fibres, such as pillows, quilts and bedspreads; also suitable for items stuffed with down Note: .
Overview of programmes Programme/type of laundry/instructions Settings Lingerie * For delicate, washable underwear, e.g. made of velvet, lace, Lycra, silk or satin Max. 1 kg en Ž - 40 °C 0 - 600** rpm ¦, (, x, Ï, Z, p, %, $, Á Detergent -, fabric softener è Curtains * 3.5 kg heavy curtains or 25 - 30 m² lightweight curtains Notes ■ Shorter rinse and final spin cycles. ■ Use a detergent that is suitable for machine washing curtains. ■ The Prewash (T) button is set by default.
en Overview of programmes Programme/type of laundry/instructions Settings Spin * Extra spin with selectable speed 0 - 1600** rpm p Detergent -, fabric softener - Drain * For the rinsing water, e.g. after the $ setting (Rinse Hold = no final spin cycle) Detergent -, fabric softener - Outdoor / Waterproofing * Wash cycle followed by waterproofing of membrane-coated weatherproof and outdoor clothing or water-resistant items Max. 1 kg 1. Select a programme. 2.
Overview of programmes Programme/type of laundry/instructions Settings Sportswear * Sportswear and leisurewear made from microfibre fabrics Notes ■ Laundry must not be treated with fabric softener. ■ Before washing, clean the detergent drawer thoroughly (manual compartment) to remove any fabric-softener residue. Max. 2 kg Automatic * Hard-wearing fabrics; the degree of soiling and the type of fabric are automatically detected and the washing sequence and intelligent dosage are adjusted accordingly.
en Programme default settings 0 Programme default settings The programme default settings are displayed in the main menu after selecting the programme. Display panel ~ Page 27 Progamedfault seings You can change the default settings: ■ Temperature, Spin speed and Finished in as long as the arrow is displayed in the main menu and/or ■ the i-Dos settings ~ Page 27, ~ Page 39 Finished in The programme duration is shown after selecting the programme.
Programme default settings i-DOS settings i-DOS i for fabric softener Your washing machine has an intelligent dosing system for liquid detergent and fabric softener (or detergent when using the setting Dispenser content: Detergent ~ Page 53) For the majority of programmes on your washing machine, detergent and fabric softener are dosed automatically. The i-DOS settings are not retained when the appliance is switched off.
en Additional programme settings/options \ Additional programme settings/options (* depending on the model) The settings/options that are available depend on the model. Depending on the programme selected, you can select different settings/options in order to better adapt the washing process to your items of laundry. Adit onalprgamest ings/optins The settings can be selected: via the corresponding button on the control panel or ■ via the Options button.
Additional programme settings/options en Easy-Iron * Rinse Hold * (p) Settings that can be selected: on – off Reduces creasing thanks to a special spin sequence followed by fluffing and reduced spin speed. ($) Settings that can be selected: on – off The washing remains in the water after the last rinse cycle. End the programme ~ Page 46 Note: The washing's residual moisture is increased.
en Additional programme settings/options Stains * (x) In total, there are 16 different types of stain to choose from. Types of stain that can be selected: • Baby food | Blood Ç Egg Ì Strawberry ¸ Soil + sand · Grass À Coffee È Cosmetics Í Orange º Red wine » Chocolate y Sweat É Dirty socks Ê Grease + oil Ë Tea ¹ Tomatoes off Do not let stains dry. Remove solid substances beforehand. Select a programme with a stain type: 1. Arrange items of washing as usual. 2. Select a programme. 3.
Operating the appliance 1 Operating the appliance Preparing the washing machine Operatingheaplince Note: The washing machine must be correctly installed and connected. From ~ Page 14 1. 2. 3. 4. Plug into the mains. Turn on the tap. Open the washing machine door. Check that the drum is completely drained. Drain if necessary. Otherwise, the load display may malfunction.
en Operating the appliance Select additional programme settings By selecting additional settings/options, you can better adapt the washing process to your items of laundry. The settings can be selected or deselected depending on the progress of the programme. ~ Page 27 The EcoPerfect and SpeedPerfect button indicator lamps light up if a setting is activated. The other settings are indicated by a symbol on the display panel if the setting is activated.
Operating the appliance Start the programme Make sure that no items of laundry are trapped between the door and the rubber seal, and close the door. ■ The main menu for the selected programme is indicated again on the display panel. Press the A button to start the programme. During washing, the progress of the programme is displayed in a bar on the display panel. The bar fills in during the washing cycle and provides information about the current progress of the programme.
en Operating the appliance Adding laundry Cancel the programme After starting the programme, you can add or remove laundry if necessary. Press the A button to do this. The A button indicator lamp flashes and the machine checks whether it is possible to add laundry. It is possible to add laundry when Pause: Reload is possible appears on the display. To continue the programme, press the A button. The programme continues automatically. For programmes at high temperatures: 1. Press the A button. 2.
Operating the appliance en Removing laundry/switching off the appliance 1. Open the loading door and remove the laundry. Follow the information on the display panel. 2. Press the # button. The appliance is switched off. 3. Turn off the tap. Note: Not required for AquaStop models. Notes Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item. ■ Remove any foreign objects from the drum and the rubber gasket – risk of rusting. ■ Wipe the rubber gasket dry.
en Intelligent dosing system a Intelligent dosing system Intelligent dosing system in the detergent drawer Inteligentdosingytem i-DOS Intelligent Dosing system Your washing machine has an intelligent dosing system for liquid detergent and fabric softener. The i-DOS compartments ß and i/ß in the detergent drawer are used for this purpose. You can choose whether you would like to use one liquid detergent and one fabric softener or two liquid detergents.
Intelligent dosing system en When the appliance is switched on, the fact that the detergent drawer is closed completely is indicated by the following: ■ the corresponding illuminated display on the drawer handle lights up when intelligent dosing i-DOS w, i-DOS iIw is selected. ■ the display flashes once and then goes out if intelligent dosing is not selected. The dosage strength has been preset to low (lightly soiled laundry) for detergent w and to medium (medium level of softness) for fabric softener i.
en Intelligent dosing system Base dosage The basic dosages are: ■ ■ For detergents – based on the manufacturer’s recommendation for average soiling and the respective water hardness. F or fabric softeners – based on the manufacturer's recommendation for a medium level of softness. Refer to the packaging label on your detergent/fabric softener or ask the manufacturer directly for this information. To find out the hardness of your water supply, use a test strip or check with your water supplier.
Intelligent dosing system Dispenser content for i-DOS iIw Instead of fabric softener, a second liquid detergent can be used in the iDOS iIw dispenser. Notes ■ When switching the i-DOS iIw dispenser content from fabric softener to detergent, the basic dosage for detergent is set to factory settings for this dispenser and the dosage for this detergent is set to off for all programmes in which intelligent dosing can be used.
en Intelligent dosing system Dosing and adding detergent: 1. Pull out the detergent drawer. 2. Add the correct dosage to compartment v u depending on: – Soiling – Water hardness (ask your water supply company) – The amount of laundry – The manufacturer's instructions 3. Close the detergent drawer.
Appliance settings Q Appliance settings You can change the following appliance settings: en To change the settings, press and hold both basic settings 3 sec. buttons for approx. 3 seconds. ~ Page 28 Apliancest ings Settings that can be selected: ■ End signal off – quiet – medium – loud – very loud Adjust the volume of the end signal. ■ Button signal off – quiet – medium – loud – very loud Adjust the volume of the button signals.
en Sensors H Sensors Automatic load sensing Sensor Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning.
Cleaning and maintenance 2 Cleaning and maintenance :Warning Machine housing/control panel ■ Cleanigdmaintec Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and pull out the mains plug. en ■ ■ Wipe the housing and the control panel with a soft, damp cloth. Remove the detergent residue immediately. Do not clean with a water jet. Drum : Warning Use chlorine-free cleaning agents, do not use steel wool.
en Cleaning and maintenance i-DOS detergent draw and its housing 1. Emptying the dispensers: The dispensers have emptying outlets with removable sealing plugs at the front. To empty the dispensers, first remove the drawer handle as shown below: a) Pull out the detergent drawer. b) Pull the catch (A) on the back of the drawer handle (in the centre at the bottom) slightly towards you. This unlocks the drawer handle (B), which you can then pull off by lifting it upwards.
Cleaning and maintenance – Protect the rear drawer connector against water, detergent or fabricsoftener residue; if necessary, clean the outer surfaces with a soft, damp cloth. Dry before putting back in. en 1. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump. 2. Switch off the appliance. Pull out the mains plug. 3. Open and remove the service flap. e) Clean the drawer and the cover with a soft, damp cloth or a hand shower.
en Cleaning and maintenance 6. Put the service flap back on, lock it into place and close it. Note: To prevent unused detergent from flowing straight into the drain during the next wash, pour 1 litre of water into compartment v u and start the Drain programme. The drain hose at the siphon is blocked 1. Switch off the appliance. Pull out the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. 3. Clean the drain hose and siphon connecting piece.
Faults and what to do about them. en 3 Faults and what to do about them. Emergency release Faultsandwht odabut hem. E.g. in the event of a power cut The programme continues when the power supply is restored. However, if the laundry has to be removed, the washing machine door can be opened as follows: : Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water and laundry. If possible, leave it to cool down first.
en Faults and what to do about them. Information on the display panel Display Cause/remedy Re-fill the i-DOS iIw, w The i-DOS dispensers are below the minimum fill level; top up ~ Page 48. dispenser i-DOS iIw, i-DOS w error; deactivate i-DOS iIw, i-DOS w set i-DOS iIw, i-DOS w to off. Call the after-sales service. The appliance can still be operated using manual dosing. Manual dosing ~ Page 51 Please close detergent drawer Push the detergent drawer in correctly.
Faults and what to do about them. en Display Cause/remedy Drum care information: This instruction reminds you to carry out the Drum Clean 90 °C programme or a 60 °C programme to clean and care for the drum and the outer tub. Notes ■ Run the programme without laundry. ■ Use washing powder or a detergent containing bleach. To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for woollens or delicates.
en Faults and what to do about them. Faults Cause/remedy The water is not draining. ■ ■ ■ Water is not visible in the drum. The spin result is not satisfactory. Laundry wet/too damp. Not a fault – the water is below the visible area. ■ ■ ■ The spin cycle runs several times. The programme is taking longer than usual. Residual water in the care-product compartment. Odours in the washing machine. Repeated, intensive foaming.
After-sales service Faults en Cause/remedy The display panel/ indicator lamps do not work while the appliance is running. There is detergent residue on the laundry. ■ ■ ■ ■ ■ In the "Reload" status, A flashes very quickly and a signal sounds. ■ ■ Power failure? Have the fuses blown? Switch on/replace the fuses. If the fault occurs repeatedly, call the after-sales service. Some phosphate-free detergents contain water-insoluble residue. Select Rinse or brush the laundry after washing.
en Consumption rates [ Consumption rates Energy and water consumption, programme duration and residual moisture for the main washing programmes Consumptionrates (approximate values) Programme Load Energy consumption* Water consumption* Programme duration* Cottons 20 °C 9 kg 0,35 kWh 70 l 3]h Cottons 40 °C 9 kg 1,25 kWh 70 l 3^h Cottons 60 °C 9 kg 1,20 kWh 70 l 3h 9 kg 0,73 kWh 77 l 5_h Cottons 90 °C 9 kg 2,60 kWh 80 l 3h Easy Care 40 °C 4 kg 0,65 kWh 80 l 2h Mix 40 °C
Technical data en J Technical data Technical data Technialdt Dimensions: 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A Nominal power 1900 – 2300 W Water pressure: 100 - 1000 kPa (1 - 10 bar) Power consumption when switched off: 0,12 W Power consumption when left on: 0,43 W 65
en Technical data Information for test institute Items Pre-treatment of new appliance According to standard Washing programme Testing instructions Age of test loads Loading Procedure No. of Layers External circle Layer1 Layer2 Layer3 Layer4 Layer5 Instruction Run two empty runs of Cottons 90 °C with 1600 rpm: The 1st run with 50g detergent and 8g anti sudsing agent, the 2nd run without detergent and sudsing agent. AS NZS 2040.1-2005 AS NZS 2040.
Aqua-Stop warranty en r Aqua-Stop warranty Only for appliances with Aqua-Stop Aqua-Stopwarnty In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused. 2. The liability guarantee is valid for the service life of the appliance. 3.
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.
