Operating/installations instructions

Programme default settings en
33
Starching
Note: Laundry should not be treated
with fabric softener.
1. Switch on the appliance.
2. Select the à programme.
3. Measure starch into compartment ©
in accordance with the
manufacturer's instructions (clean
first if necessary).
4. Touch the A button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the appliance to bleach
clothes.
0 Programme default
settings
Programme default settings You can change the default settings for
selected programmes. The settings can
be changed even while the selected
programme is running. The effects
depending on the progress of the
programme.
Temperature
Before and after the programme starts,
you can change the set temperature
depending on how far through the
programme the appliance is.
The maximum temperature that can be
set depends on the programme that has
been selected.
Spin speed
Before and after the programme starts,
you can change the spin speed (in rpm;
revolutions per minute) depending on
how far through the programme the
appliance is.
setting 2: 2=”No spin”. The water is
only drained.
You can select “No spin” to prevent
creasing if the laundry will not be taken
out of the appliance immediately after
the programme has ended.
The maximum speed that can be set
depends on the model and programme
that has been selected.