Installation Instruction

en Operating the appliance
40
1 Operating the
appliance
Operati ng the appliance Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean programme.
~ "Before washing for the first time"
on page 20
Notes
■ Never switch on a damaged
appliance!
■ Inform customer service!
1. Insert mains plug.
:Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2. Turn the water tap on.
3. Open the appliance door.
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The Cotton programme (only washing),
which is preset at the factory, is then
always displayed.
You can use this programme or select a
different programme.
Note: If you have activated the
childproof lock, you have to deactivate it
before you can set a
programme.~ "Childproof lock"
on page 43
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
Adjusting the selected
programme
Changing default settings
You can use the displayed default
settings or adjust the selected
programme to fit the laundry care needs
~ Page 43 e.g. Temperature, Spin
speed, Finish in time.