Operating/installations instructions

en Positioning and connecting
18
Transportation
e.g. when moving home
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply ~ Page 33
3. Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked ~ Page 32
4. Disconnect the washing machine
from the mains.
5. Remove the hoses.
Installing the transport locks:
1. Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2. Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before switching on the appliance
again:
Notes
■ The transport braces must be
removed.
■ To prevent unused detergent from
flowing into the outlet during the next
wash: Pour approx. 1 litre of water
into compartment II and start the
0 Spin/[ Drain/Empty programme
(if only a drain cycle is required, set
rpm (spin speed) to - 0 -).