Operating/installations instructions

Operating the appliance en
29
■ the è symbol disappears, and
adding is possible.
■ the è symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button A.The program continues
automatically.
Notes
■ Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■ The load display is not active during
reloading.
Changing the programme
1. Press the A button.
2. Select another program.
3. Press the A button.The new
program starts from the beginning.
Cancel the programme
For programmes at high temperatures:
1. Press the A button.
2. To cool down laundry: Select
' Rinse.
3. Press the A button.
For programmes at low temperatures:
1. Press the A button.
2. Select 0 Spin/[ Drain/Empty (if
only a drain cycle is required, set
rpm (spin speed) to - 0 - )
3. Press the A button.
Programme end during rinse
hold
- - - - 0appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the programme by selecting
the Abutton or a spin speed.
End the program by setting the program
selector to 0 Spin/[ Drain/Empty (if
only a drain cycle is required, set rpm
(spin speed) to - 0 - ) and then select
the A button.
Programme end
End appears in the display panel and
the indicator lamp of the A button is
off.
Removing laundry/switching
off the appliance
1. Open the loading door and remove
the laundry.
2. Turn the programme selector to Off.
The appliance is switched off.
3. Turn off the tap.
Note: Not required for AquaStop
models.
Notes
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
■ Wipe the rubber gasket dry.
■ Leave the loading door and
detergent drawer open so that any
remaining water can evaporate.
■ Always wait until the programme
ends as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.