Operating/installations instructions

16
Selecting the programme
Basic programme
Select the desired programme - also see the
Programme Chart.
For the maximum spin speed of the
programme, see the chart on the next page.
Cottons+Linens y 90°C
Energy intensive programme for heat-
resistant textiles, e.g. made of cotton or
linen.
To protect the wastewater pipes, the hot
wash water is mixed with cold water and
cooled before being drained.
Cottons+Linens y 60°C + ”Intensive”*
button
For stained, heavily soiled textiles, e.g.
cotton or linen.
Energy saving programme. The extended
washing time achieves a cleaning result
comparable to that of the 90°C programme,
but uses considerably less energy.
Cottons+Linens y 60°C + Prewash*
For heavily soiled, hard-wearing textiles.
Cottons+Linens y 30, 40, 60°C
For hard-wearing textiles.
Easy-Care A 30, 40, 60°C
For Easy-Care textiles, e.g. made of cotton,
linen, synthetic or blended fabrics.
Delicates q 30, 40°C
For delicate, washable textiles, e.g. made of
cotton, synthetic or blended fabrics (e.g.
curtains).
No spin between rinse cycles.
Woollens U cold, 30°C
For hand and machine washable wool or
wool-rich textiles, e.g. cashmere, mohair or
angora.
Also suited for hand washable
u silk.
Quick Wash 40°/30 min I
For a load of lightly soiled laundry items up to
2.5 kg. To freshen up cottons, linens, coloureds
or hard-wearing synthetics.
Washing temperature automatically set to
40°C. Time limited to 30 minutes.

For this programme, reduce the amount
of detergent by half!
Additional programme selections
Rinse K
Separate rinse cycle with subsequent spin
for Easy-Care textiles.
Spin B
Separate spin cycle. Wash or rinse water is
pumped out before the spin cycle.
Notes

When choosing ”rinsing” and ”spinning”
programmes, note the appropriate spin
speed, see Chart page 17.
* Depending upon the model.