Operating/installations instructions

22
Cleaning the filter
(depending upon model)
Cleaning the pump filter
This filter collects bits of fluff and small
objects, i.e. detached buttons that have fallen
into the container.
To clean, proceed as follows:
- Turn the drum so that the closed drum lid is on
the bottom: A plastic part
훽
can be seen
(Figure 17).
- Remove screw
훾
.*
- Press to release retainer
훿
and slide part
훽
to the right to unlatch.
- Turn the drum so that the lid points upwards.
Open the drum lid, slide part
훽
in the
direction of the arrow and remove
(Figure 18).
•Gently turn the drum with open doors to
front side of the machine
(Figure 19) .
Access to the pump filter is accomplished
by removing part
훽
.
- Remove this part from its holder
(Figure 19).
- Remove foreign objects and fluff.
- Clean filter under running water
(Figure 20) .
- Press filter back into its holder up to the
stop.
* Depending upon the model.
Figure 17
Figure 19
C
B
A
A
Figure 18
Figure 20