Operating/installations instructions

6
Figure 1 Figure 2.1
Figure 2.2
Figure 2.3
13
1
1
2
2
A
Removing the transport securing devices
1 Remove the machine from the transport
base.
Remove wedge
훽
(Figure 1 ).
2 Remove the 4 screws
훾
with a screwdriver
(Figure 2.1 ).
3 Remove transport securing device
훿
Remove both screws

(Figure 2.2 ) using
a number 10 or 13 spanner (depending upon
the model).
Check to see that both plastic inserts on
the connecting carrier have also been
removed.
Reinstall screws
훾
in their original positions.
4

Both holes must be covered with the
caps provided

(found in the accessories
package)
( Figure 2.3 )!

Before the machine is used for the first time, all transport securing devices from
the back of the appliance must be removed and stored for any later transport
(i.e., relocation).