Technical and Specification Information Greensource air to water heat pump series Greensource air to water heat pump series Building Regulation G3 compliant
Worcester, Bosch Group Technical Help line Worcester and you. Making a difference.
The Greensource air to water heat pump series Advanced renewable energy technology from Worcester that’s Worcester, Bosch Group has taken the lead in developing leading the way to a greener and more sustainable future.
The Greensource air to water heat pump series Features Benefits Scroll compressor Flow temperatures up to 65ºC Low noise output Quiet operation Worcester heat pumps make use of the latent energy from The system comprises an external energy collector and an 2 years parts and labour guarantee* Peace of mind the outside air by converting it into heat which can be used internal Building Regulation G3 compliant heating and hot No flue system Ease of siting with a typical wet heating and hot water
Worcester offers a choice of 3 air to water heat pumps The table below shows the relationship between flow Curve slope settings: (6kW, 7kW and 9.5kW) which are intended to provide all temperature and CoP. The CoP stated is for use only as The unit is already factory preset, however you can adjust Working temperatures the heating and hot water requirements of the home. typical examples and will differ between installations.
Inside story – Greensource heat pump outdoor unit Inside story – Greensource heating and hot water distribution unit Temperature and pressure relief valves (factory fitted) System pressure relief valve (factory fitted) REGO 800 control panel Low pressure switch Manual air vent Sight glass Four-way valve Expansion valve Condenser Non-return valve Drying filter Mixing valve Heat carrier pump (G2) High pressure switch Service connection Service connection Compressor Pressure gauge Drain valve Pump for
Technical data – Greensource air to water heat pump outdoor unit Model Technical data – Greensource indoor hot water distribution unit Greensource air to water Greensource air to water Greensource air to water heat pump 7kW heat pump 9.
Installing the Greensource air to water heat pump Siting of the heating and hot water distribution unit Hot water distribution connection layout 29.50 Installation clearances A minimum of 600mm is required in front of the unit. The Top view other sides can be blocked. A minimum of 25mm is required Installation clearances between the unit and other permanent installations e.g. Siting of the outdoor unit Min. 1,500mm solid base, e.g. concrete slabs*. The heat pump should be walls, sinks, etc.
Installation requirements The following examples are for demonstration purposes only: Maintenance on the outdoor heat pump The outdoor heat pump unit should be checked regularly for An air source heat pump is typically sized to provide around leaves and debris, especially on the evaporation fins and Alternatively, or where TRVs are used a by-pass may be 85% of the peak load of the house on the coldest day. Since water tray.
The Code for Sustainable Homes Why we need a Code for Sustainable Homes Carbon emissions from domestic properties have to be The benefits of the Code reduced – a fact highlighted by statistics for 2004 which • How the Code works Apart from these minimum requirements the Code is The Code measures a home’s sustainability against completely flexible, allowing developers to choose which show that 73% of domestic CO2 emissions are produced by For the environment the benefits include: these 9 design cat
Frequently asked questions What benefits do air to water heat pumps offer over ground The technician should then turn the unit on and check that: Can you combine radiators and underfloor heating source heat pumps? • • the water pump is free and operating properly • the unit’s fan is operating • that the unit is increasing the water to the correct when using an air to water heat pump? There are significant benefits – lower installation costs – no need to dig trenches or boreholes.
Greensource air to water heat pump range and accessories Greensource 6kW Outdoor Heat Pump and Hot Water Distribution Unit* Greensource 7kW Outdoor Heat Pump and Hot Water Distribution Unit* Greensource 9.5kW Outdoor Heat Pump and Hot Water Distribution Unit* 100 litre Buffer Storage Tank The very best training programmes from Worcester Worcester has always placed great emphasis on technical Mobile training support and training for installers and service engineers.
Worcester training courses One stop shop training Industry focused training courses We are here to provide you with training and assistance for all areas of your business, not just product training. BPEC warm water underfloor heating installation Covering Call us on 01905 752526 to order a full training course brochure.
A complete after-sales service As part of the worldwide Bosch Group, Worcester strives to maintain the highest possible standards of after-sales care.
Useful numbers Customer Service Sales Engineer Appointments Tel: 01905 752640 Email: appointment.worcester@uk.bosch.com Fax: 01905 456445 or telephone 0844 892 3000 Spare Parts Enquiries Tel: 01905 752576 Email: service.mailbox@uk.bosch.
