Operating/installations instructions

24
Washer-dryer
stack connec-
tion set
Order no.: WTZ 1250
The dryer can be placed on top of a Bosch
washing machine of the same dimensions to
save space.
!
Risk of injury
For reasons of safety, the dryer must be
installed by an expert. Always use a
connection set to secure the dryer to the
washing machine.
Assembling the
exhaust air hose
Exhaust air hose:
Order no.: WTZ 1130
Adapter: 494355
(optional)
There are exhaust air outlets in the left side
wall and the rear panel of the dryer.
Select the most suitable exhaust air outlet after
installing the dryer.
Turn the exhaust air hose (see Special
accessories) or the adapter directly to the
required exhaust air outlet. Turn the hose or
adapter clockwise to do so.
Seal off the other exhaust air outlet with the
plastic cover.
1 Plastic cover
2 Exhaust air hose
Place the end of the exhaust air hose in the
open air without bending it. The exhaust air
hose should only be positioned horizontally or
vertically and never left to sag.
The exhaust air hose should not be more than
2m long.
Position the exhaust air hose so that there is
no counter pressure (e.g. from wind) on the
exhaust outlet.