en-us Use and Care Manual, Installation Instructions Dryer WTG86400UC
Welcome to Your New Dryer! Congratulations on your selection of a new Bosch dryer for your laundry needs. We are confident you will enjoy the superior performance and reliability. Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new dryer. Thank you for choosing Bosch. Visit our website at www.bosch-home.com/us for more information and to view a selection of our products.
Table of contents en-usUseandCreManul,InstalionIstrucions Important information ................................................... 4 Purchase information ........................................................... 4 Customer service ................................................................. 4 Your dryer is intended for ............................................. 5 Safety Definitions .......................................................... 5 IMPORTANT SAFETY INSTRUCTIONS .......................
Important information Purchase information Customer service Please take a moment to record the following basic information about the purchase of your new Bosch dryer. This information will be helpful in the event you need to contact Customer Service or would like to order accessories or replacement parts for your dryer. Your dryer does not require any special care other than the maintenance and care mentioned in this manual.
Your dryer is intended for ▯ ▯ ▯ ▯ ▯ Only household use and in a non-commercial environment. Drying textiles washed in a residential style clothes washer. Children must not do any laundry without supervision. Keep pets away from the dryer. Recommended operating conditions: Ambient temperature: 41-95°F / 5-35°C Relative humidity: under 95% Installation by qualified installers.
9 I M P O R T A N T S A F E T Y IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS I N S T R U C T I O N S R E A D A N D S A V E T H E S E I N S T R U C T I O N S WARNING When properly cared for, your new appliance has been designed to be safe and reliable. Read all instructions before using the appliance. These precautions will reduce the risk of burns, electric shock, fire, and injury to persons.
9 IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS WARNING WARNINGS FOR CHILDREN ▯ Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. ▯ Make sure to utilize all child lock/safety features of your appliance, and be sure to turn the appliance Off when not in use.
Introduction to your new dryer 9 WARNING RISK OF FIRE, ELECTRIC SHOCK OR INJURY To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS of this manual before installing or operating this appliance. ~ IMPORTANT SAFETY INSTRUCTIONS; Page 6 Standard features and helpful information Thank you for choosing Bosch for your laundry appliance needs.
Dimensions and clearances required Installation for best performance 9 CAUTION DO NOT INSTALL THE DRYER: ▯ outdoors, ▯ in an environment with dripping water, ▯ near flammable materials, ▯ in rooms which are at risk of freezing, ▯ in rooms which may contain gas or other fuels, ▯ on carpets. The dryer should be installed in an open area with no restrictions to ambient air for the best drying results. Space allowances to fully open the door should also be considered.
Closet: Stand alone (shown) or Side by Side Under counter (Preferred) $ & ( & % $ . ) Front of the appliance fully open. No doors or coverings. - ' Label Dimension U.S. Metric Inches cm A Both Sides 0.6 1.5 B Top 6.3 16 C Rear 2.5 6.2 D Front 2.4 6 E & F are minimum area size! E Top Vent 63 sq. 404 sq. F Bottom Vent 63 sq. 404 sq. Vent spacing is actual (not minimum dimensions) G 37 94 H 26 66 J 3 7.6 K 29 73.6 Minimum opening dimensions A B C 28 in. 23.8 in. 35.5 in. 71.1 cm 60.5 cm 90.
Installation Instructions READ AND SAVE THESE INSTRUCTIONS Introduction Read these installation instructions completely and carefully before starting to install your new dryer. The information contained can save you time and effort and will help to ensure optimum performance of your new dryer. Be sure to observe all warnings and cautions. These installation instructions are intended for use by qualified installers.
Parts provided with your dryer Back side of the dryer Dryer drum contents A literature pack is shipped in the dryer drum. Be sure to remove this item before using the dryer.
Accessories for your appliance Pedestal The dryer can be mounted on a special pedestal for easier loading and unloading. Pedestal item number: WMZ20500 ▯ Stacking kits The dryer can be stacked on a Bosch washer of the same dimensions to save space. Stacking kit without a shelf: WTZ20410UC Drying rack A drying rack placed inside the dryer for drying wool items, shoes, etc. is available. Drying rack item number: WMZ20600 Accessories can be purchased from customer service or your local dealer.
▯ Sink/Basin or Floor drain: If using the elbow supplied on the hose re-position elbow closer to the drain end of hose and fasten with the plastic ties as shown in picture “C”. ▯ Sink Drain Pipe: Attach and secure drain hose as shown below in picture “F”. Use a standard hose clamp which can be purchased from your local hardware store. & PLQ LQ FP PD[ LQ FP Secure hose and/or elbow as shown below. Sink “D” or floor “E”. NOTICE: Examples shown are for reference only.
ALL ELECTRICAL CONNECTIONS AND CIRCUITS WARNING 9 ▯ ▯ 9 ELECTRIC SHOCK HAZARD ▯ Do not pull on the power cord to unplug the dryer. ▯ Protect the power cord from physical damage such as being twisted, kinked, pinched, or walked on for example. ▯ DO NOT use an extension cord or an adapter to connect the dryer to the power supply. ▯ Make sure: The power cord fits into the outlet/receptacle. The home’s internal power supply circuit wire size is sufficient and electrically grounded.
3. Open the connection box toward the rear of the appliance by removing the T20 torx head screw fastening the cover. 4. Remove the 4-wire power cord (as supplied): A. Remove the 3 Philips screws (2 labeled L and one labeled N). B. Remove the green grounding screw PE (T20 torx). NOTICE: Be careful not to drop the screws into the dryer. 12.Install the last terminal block screw (Philips) and 1 grounding screw (T20 torx) at locations N and PE. 13.
Leveling the dryer Check heating system Importance of leveling the dryer It is important that your dryer is level and that all four dryer feet press with equal pressure against the floor. This will help assure the quietest, most vibration-free use of your dryer. 1. Check that the drum is empty. To adjust the dryer feet: 1. Install the dryer on a level and solid surface, preferably in a corner of a room. 2. If the floor is uneven (or not level) adjust the dryer feet as required to level the dryer.
Getting to know your appliance Control panel ( Dry Level, Time dry, Finish in Selectable Option Settings for customizing Programs as desired. Indicator Symbol lights or desired time is displayed if setting is active.~ Default Program and Option settings; Page 27 0 Wrinkle Block, Low Heat, Signal Additional option settings. Indicator Symbol lights if setting is active.
Operating Instructions 9 WARNING RISK OF FIRE, ELECTRIC SHOCK, OR INJURY To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and Operating Instructions before operating this appliance. Your new dryer # 3 + ( Control panel, display area, program selector 0 Drum with interior light (depending on model) The interior light activates after the door is opened and after the program starts, it switches off automatically.
@ Lint filter H Air inlet P Open the maintenance flap Close the maintenance flap Heat exchanger 9 WARNING BEFORE INSTALLING OR USING YOUR DRYER Read and follow all installation and operating instructions. Check the machine. Never connect the utilities (power or water) to or start a damaged machine! Contact customer service! ~ Customer service; Page 4 Check to be sure the dryer drain hose is installed properly.
Program selection For optimum drying results your dryer offers several different types of programs to choose from. Select the required drying program from the program table according to the examples.~ Program selection table; Page 26 Time programs Time programs run at specific temperatures and are suitable for delicate items, individual or a few small items and subsequent drying.
Loading the laundry 9 Load the laundry WARNING RISK OF EXPLOSION Do not dry laundry that has ever been in contact with solvents, oil, wax, grease or paint (e.g. hair styling products, nail varnish remover, stain remover, cleaning solvent, etc.). 1. Check lint filter. Place laundry in the empty drum. Put each piece of laundry into machine separately. For best results the laundry to be dried must be sorted according to type of laundry and desired degree of drying.
3. If required, select Low Heat by pressing the button. ~ Additional Program Option settings; Page 27 4. If required, select Wrinkle Block by pressing the button. ~ Additional Program Option settings; Page 27 Tip: The estimated remaining time will be updated. Indicator of program sequence Bosch dryers use an advanced control system which continually monitors the laundry’s remaining moisture. The current state of the process and status of the program is shown by indicator lights (Damp, =, Dry, End).
Signal For switching the buzzer on and off touch the Signal button. The buzzer indicates program end if it is activated. Other alarms are not influenced by this option. You can also change the following settings: ▯ volume for buzzer ▯ volume for button signals To change these settings always activate adjustment mode first. Activate adjustment mode 2II 1. Select Cotton Extra Dry on position 1. The appliance is on. 2. Hold down Start/Pause and turn the program selector to the right (position 3).
Laundry Preparing the laundry NOTICE: Damage to the appliance/fabrics. Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the dryer. Therefore, note the following tips when preparing your laundry: ▯ Empty all pockets to ensure no loose debris (coins, keys, other hard objects and cigarette lighters) are placed in the dryer drum. ▯ ▯ ▯ Close any fasteners (such as zippers, hooks and eyelets) that could cause laundry to catch or become entangled.
Program selection table Programs Standard programs Cotton Dry Cotton Extra Dry Perm P Damp Perm P Dry Perm Press Extra Dry Delicates Quick 40 Timed Dry Variable Hand Wash/Wool Air Fluff/No Heat Quick Dry Auto Max. load up to: Type of laundry (For laundry which is:) full load Normal cotton and linen type load (bed linen, cotton clothes, etc.
Default Program and Option settings At the factory initial settings are pre-set for all cycles. You can change some program settings as follows. Dry Level This option adjusts the drying time in small steps for certain programs. Default setting = OFF (no LED Symbol shown) Selectable values: OFF, +1, +2, +3 The Dry Level is retained until changed. NOTICE: The higher the number value the increased time of drying.
Spin speed The Spin Speed setting is based on your washer’s normal spin speed. Adjusting this setting allows the dryer’s displayed time to be as close as possible to the actual drying time. NOTICE: The spin speed is not the same as the rotation speed of the dryer drum. To change the dryer’s Spin Speed setting follow the instructions below. Activate adjustment mode 2II 1. Select Cotton Extra Dry on position 1. The appliance is on. 2.
Cleaning and maintenance USER-MAINTENANCE INSTRUCTIONS Your appliance is designed to give you years of service. Observe the following instructions to maintain your appliance and keep it in top operating condition. 9 9 Cleaning the lint filter A dirty filter extends the drying time and increases energy consumption. WARNING The filter should be cleaned before or after each drying process. RISK OF EXPLOSION Never use solvents or highly flammable liquids for cleaning.
4. Open the filter. Cleaning the heat exchanger The heat exchanger requires periodic cleaning (recommended once per month under normal drying conditions). The frequency of cleaning depends on the amount and type loads being dried. To clean the heat exchanger: 1. If the dryer is hot, run on Air Fluff/No Heat program to 5. Remove fluff (run hand over filter). NOTICE: Severely dirty or clogged lint filter should be rinsed under warm running water.
7. Rinse the heat exchanger and the cap on all sides with a jet of water to completely remove all of the lint and fluff. Cleaning the moisture sensors The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is. After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and textile care products.
Troubleshooting Introduction NOTICE: Before doing maintenance work or trying to fix a problem, rotate the program selector to Off. If the power supply is interrupted during operation, the program will not continue when power is restored. When power is restored, confirm program and selected options are as desired and the press the Start/Pause button. WARNING 9 RISK OF INJURY TO SKIN The door, the drum and the laundry may be hot.
General Troubleshooting Often when you encounter a problem it will be something minor. Before you call customer service, consider the suggestions and instructions below: NOTICE: The troubleshooting items listed below can help you resolve minor issues with your dryer quickly and without the necessity of a service call. Determing the Problem Problem Possible cause(s) Solution(s) Dryer does not start. Start/Pause indicator light does not illuminate.
Problem Possible cause(s) Creasing. Laundry load exceeded. Unsuitable program selected. One or more indicator lights are flashing. Lint filter or/and heat exchanger is dirty. Installation conditions are not adequate. Fault in program sequence or malfunction. Solution(s) Do not exceed the maximum load for selected program. Remove items of laundry immediately after the end of the program, hang them up and pull into shape. Turn program selector to Off.
STATEMENT OF LIMITED PRODUCT WARRANTY Bosch Clothes Dryer What this Warranty Covers & Who it Applies to: The limited warranty provided by BSH Home Appliances (“Bosch”) in this Statement of Limited Product Warranty applies only to the Bosch appliance sold to you, the first using purchaser, provided that the Product was purchased: For your normal, household (non-commercial) use, and has in fact at all times only been used for normal household purposes.
Warranty Exclusions: The warranty coverage described herein excludes all defects or damage that are not the direct fault of Bosch, including without limitation, one or more of the following: Use of the Product in anything other than its normal, customary and intended manner (including without limitation, any form of commercial use, use or storage of an indoor product outdoors, use of the Product in conjunction with air or water-going vessels).
*9001396580* 9001396580 9805 1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904 www.bosch-home.