Tumble dryer WTH85200AU en Installation and operating instructions
Your new tumble dryer Display rules You have opted for a tumble dryer manufactured by Bosch. : Warning! Please take a few minutes to read and become familiar with the advantages of your tumble dryer. To meet the high quality demands required by Bosch, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www.boschhome.
en Contents enI stal tionandoperatinginstructions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .4 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 ..6 ..8 . 10 7 Environmental protection . . . . .12 Packaging/old appliance . . . . . . . . . 12 Coolant . . . . . . . . . . . . . . . . . . . . . . .
en Intended use 8 Intended use ■ Intedus ■ ■ ■ This appliance is intended for private domestic use only. Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
Safety instructions ■ ■ ■ Do not allow children to clean or maintain this appliance unsupervised. Keep children under 3 years and pets away from this appliance. Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity. : Warning Risk of death! Children may lock themselves inside appliances and find themselves in a life-threatening situation.
en Safety instructions Installation ■ : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance is not installed properly, this may lead to a dangerous situation. Ensure the following: ■ ■ ■ ■ 6 The mains voltage on your power socket must match the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
Safety instructions : Warning Risk of fire/material damage/ damage to the appliance! The use of extension cords or power strips may result in fire due to overheating or short circuiting. Connect the appliance directly to an earthed socket that has been correctly installed. Do not use extension cords, power strips or multi-way couplers.
en Safety instructions : Warning Risk of injury! ■ The appliance is very heavy. Lifting it may result in injury. Do not lift the appliance on your own. Risk of inThe jury! ■ appliance has sharp edges on which you could cut your hands. Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it. Risk of inIfjury! the hoses and mains ■ cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.
Safety instructions ■ ■ During the last part of the drying cycle, the laundry in the drum is not heated (cooling cycle). This is to ensure that it remains at a temperature at which it will not be damaged. Do not switch off the appliance before the drying cycle has finished unless you remove all items of laundry from the drum immediately and spread them out (to dissipate the heat).
en Safety instructions If you operate the appliance without a fluff catcher (e.g. fluff filter, fluff depot, depending on appliance specifications), or if the fluff catcher is incomplete or defective, this may result in damage to the appliance. Do not operate the appliance without a fluff catcher, or with a fluff catcher that is incomplete or defective. Materi damage/damageobjects to the appliance ■ alLight such as hair and lint may be sucked into the air inlet when the appliance is in operation.
Safety instructions ■ ■ Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary). Spare mains cables can be ordered from our customer service. : Warning Risk of poisoning! Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents.
en Environmental protection Energy-saving tips 7 Environmental protection ■ Packaging/old appliance Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Installation and connection 5 Installation and connection Scope of delivery Instal ionadcetion ■ ■ ■ ■ Dryer Installation and operating instructions Basket for woollens* Condensation drain* Installing and connecting the dryer : Warning Risk of death! There is a risk of electric shock as the dryer is operated with electricity. ■ Check the dryer for visible damage. You must not operate the dryer if it is damaged.
en Installation and connection During installation ensure that: ■ The dryer is placed on a clean, level and firm surface, ■ The mains plug can be accessed at all times, ■ The air inlet on the dryer is kept clear and there is sufficient ventilation, ■ The area around the dryer is kept clean and ■ The dryer is levelled using the threaded feet. Note: Check the alignment of the appliance with a spirit level and correct if necessary. Change the height by turning the appliance feet.
Installation and connection en Transport and frost protection 1. Empty the condensate container. 2. Select any programme using the programme selector. 3. Press the Start button. 4. Wait for 5 minutes. Note: The condensation is drained. 5. Empty the condensate container again. 6. Switch off the dryer. Note: Despite draining, there will always be some residual water in the dryer. Caution! Any residual water may leak out and cause material damage. Transport the dryer in an upright position.
en Draining the condensation water ΠDraining the condensation water Condensation will form in the appliance as it dries the laundry. You must ensure that the drain hose is connected when you operate the appliance. If there is no drain hose connected to the appliance, the condensation water from the appliance will run into the condensation container.
Draining the condensation water en 5. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). & $ & % PD[ FP $ & PD[ FP $ PLQ FP PD[ FP Caution! Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked. Caution! Material damage due to leaks or draining water.
en The main points in brief Y The main points in brief eThmainpotsinbref 1 @ Load the laundry and close the door. -------- 2 End of the programme. 3 18 @ Remove the laundry. @ Empty the condensate container. Press the Start button. Switch the dryer on by turning the programme selector to the required programme. @ -------- -------- @ Clean the fluff filter. Switch the dryer off.
Getting to know your appliance en * Getting to know your appliance Dryer Getingtoknwyuraplince # ; + 3 ( Condensate container 0 Control and display panel 8 Drum interior light* @ Dryer door H Air inlet P Fluff filter X EasyClean filter * depending on the model 19
en Getting to know your appliance Control panel + VFKUDQNWURFNHQ H[WUD VFKUDQNWURFNHQ VFKUDQNWURFNHQ H[WUD VFKUDQNWURFNHQ EJHOWURFNHQ %OXVHQ +HPGHQ 6SRUWVZHDU ([WUD .XU] +DQGWFKHU 'DXQHQ 0L[ :ROOH ILQLVK # ( 0 8 @ H 20 Programme selector for switching the dryer on/off and selecting the programme. Programmes ~ Page 23. Start button for starting or interrupting the programme ~ Page 25. Buttons for applying default programme settings ~ Page 25. Display panel ~ Page 21.
Getting to know your appliance en Display panel Buttons on the display panel Display panel #+ ( Degree of dryness. 0 Drying Time. 8 Ready in. @ Anti-Crease. H Low-Heat. For a detailed description of all buttons, see ~ Page 25 onwards. Empty the condensation container ~ Page 28. ç Clean the fluff filter ~ Page 29 and clean the EasyClean filter ~ Page 32. e ö » Q - ˜ - “Ÿš: Programme progress for Dry, Iron Dry, Cupboard Dry, Anti-Crease, Pause and End of programme. E Childproof lock active .
en Laundry Z Laundry ■ Preparing the laundry Laundry : Warning Risk of explosion/fire! Remove any cigarette lighters and matches from pockets. Caution! The dryer drum and fabrics could be damaged. Remove all objects from pockets and observe the following information: ■ Tie cloth belts, apron strings, etc. together or use a laundry bag. ■ Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers. ■ Remove any metal objects, such as paper clips, from pockets.
Programmes and buttons en / Programmes and buttons Programmes Progamesndbutons Programme and fabrics Maximum load and programme settings/info Name of the programme Which fabrics is the programme suitable for? The maximum load is based on the dry weight of the fabrics Possible programme settings Cottons i Extra Dry Ò 8 kg Hard-wearing, heat-resistant fabrics that are made of more than one layer of cotton or linen and do not dry readily.
en Programmes and buttons Timed program warm 5 All types of fabric; time programme. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Notes ■ Only dry wool, sports shoes and soft toys with the basket for woollens ~ Page 14. ■ In the time programme, the laundry's residual moisture is not automatically detected. If the laundry is still too damp after the drying programme, repeat the programme and, if required, extend the programme length.
Programmes and buttons en Buttons Buttons Explanations and notes Note: Not all buttons and their functions can be selected in all programmes. Fine adjust ô If your laundry is too damp after drying, you can adjust the drying settings, e.g. Cupboard Dry, using the drying level button. The drying setting can be increased in three stages from – to • using the drying level button. Once you have adjusted the drying level, this setting will be retained even after the dryer has been switched off.
en Operating the appliance 1 Operating the appliance Loading laundry and switching on the dryer Operatingheaplince 2. Use the programme selector to set the required programme. The default programme settings for the selected programme appear in the display panel. Note: The dryer must be correctly positioned and connected, ~ Page 13. 1. Place the laundry in the drum. 2. Turn the programme selector to any programme to switch the dryer on. 3. Close the dryer door.
Operating the appliance en Programme sequence Cancelling the programme The programme status is indicated in the display field. The programme can be interrupted at any time; to pause, open the dryer door or press the Start button. e.g. 1:27 Expected programme duration in hours and minutes. e ö » Q - ˜“Ÿš Note: When a programme is selected, the expected drying time for the recommended load is displayed.
en Operating the appliance Emptying the condensate container By default, the condensation from the appliance runs into the condensation container. Alternatively, you have the option of discharging the condensation water* supplied depending on the model. If you choose to discharge the condensation water into the waste-water system, you will not need to empty the condensation container during the drying programme or after each time you use the dryer. 1. Pull out the condensate container horizontally. 2.
Operating the appliance Clean the fluff filter Note: During drying, fluff and hair from the laundry is trapped by the fluff filter. If the fluff filter is blocked or dirty, this reduces the flow of air, which prevents the dryer from achieving its maximum performance. Clean fluff filters also reduce energy consumption and the drying time. Clean the fluff filter after each drying cycle: en 5. Open both filters and remove all the fluff. 6. Rinse away the fluff under warm, running water. 1.
en Signal setting M Signal setting You can change the following settings: 5. The volume for the audible signal at the end of the programme is shown on the display. Signalseting ■ ■ ■ The speed at which the washing machine was spun; only used if the anticipated drying time needs to be displayed more accurately, The volume of the audible signal at the end of the programme, The volume of the audible button signals. You will need to activate the setting mode in order to change these settings.
Noises > Noises Note: During drying, particularly in the initial phase, operation of the appliance results in noise from the compressor and pump. This is perfectly normal and does not impair proper functioning of the appliance. Noise From time to time, the compressor in the dryer generates a humming noise. However, the volume may vary depending on the programme and progress of the drying process.
en Cleaning Cleaning the moisture sensor Note: The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is. After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products. Such residues must be removed regularly as the sensor function and in consequence the drying result may be impaired. 6. Now take off the filter mat. 7. Wash out the filter mat by hand using clean water.
Cleaning en 10. Check how dirty the dryer's heat exchanger is before putting the EasyClean filter back in. If it is very dirty, use a vacuum cleaner with a brush attachment to clean it carefully from top to bottom. Note: Take care not to bend or damage the fins on the heat exchanger when cleaning it. Caution! Risk of injury. You could cut yourself on the fins of the heat exchanger. Do not touch these with your hands. 11. Slide the EasyClean filter in and make sure it clicks into place. 12.
en Faults and what to do about them 3 Faults and what to do about them uFaltsandwht odabut hem Faults ð in the display panel and drying was interrupted. ç in the display panel. Cause/remedy ■ ■ ■ ■ The dryer will not start. ■ ■ ■ ■ ■ ■ Creasing. ■ ■ Empty the condensation container and press the Start button. If the optional condensation drain has been installed, the drain hose may be blocked or kinked.If the optional condensation drain has been installed, the drain hose may be blocked or kinked.
Faults and what to do about them Faults Cause/remedy Drying time too long? ■ ■ ■ ■ en The fluff filter or the EasyClean filter may be dirty, which will make the drying time longer. Clean the fluff filter or the EasyClean filter. If the air inlet on the dryer is blocked or not freely accessible, this may increase the drying time. Make sure that the air inlet remains unobstructed. The optimum ambient temperature for drying is between 15 °C and 30 °C. Outside of this range, the drying time may increase.
en Consumption values [ Consumption values Consumption values table Consumptionvalues Programme Spin speed used for spinning the laundry Duration** Energy consumption** 8 kg 8 kg 1400 rpm 180 min 1.52 kWh 1000 rpm 203 min 1.90 kWh 800 rpm 236 min 2.25 kWh 1400 rpm 123 min 1.12 kWh 1000 rpm 146 min 1.40 kWh 800 rpm 179 min 1.58 kWh 3.5 kg 3.5 kg 800 rpm 66 min 0.50 kWh 600 rpm 78 min 0.
Technical data J Technical data Dimensions: 85 x 60 x 60 cm Height x width x depth Weight: Approx. 48 kg Maximum load: 8 kg Condensate container: 4.8 l Mains voltage: 220 - 240 V Connected load: Max. 600 W Fuse: 10 A Technialdt Drum interior light* Ambient temperature: 5 - 35 °C * en J After-sales service After-sales service If you cannot rectify the fault yourself (faults, what to do?), please contact our after-sales service.
6
6
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.
