Tumble dryer WTH85200GB en Installation and operating instructions
Your new tumble dryer Display rules You have opted for a tumble dryer manufactured by Bosch. : Warning! Please take a few minutes to read and become familiar with the advantages of your tumble dryer. To meet the high quality demands required by Bosch, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www.boschhome.
en Contents enI stal tionandoperatinginstructions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .4 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 ..5 ..7 . 10 7 Environmental protection . . . . .12 Packaging/old appliance . . . . . . . . . 12 Coolant . . . . . . . . . . . . . . . . . . . . . . .
en Intended use 8 Intended use ■ esudntI ■ ■ ■ This appliance is intended for private domestic use only. Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
Safety instructions ■ ■ ■ Do not allow children to clean or maintain this appliance unsupervised. Keep children under 3 years and pets away from this appliance. Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity. : Warning Risk of death! Children may lock themselves inside appliances and find themselves in a life-threatening situation.
en ■ ■ ■ ■ ■ ■ Safety instructions The mains voltage on your power socket matches the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate. The appliance is only connected to a source of alternating current via a nationally recognized and grounded outlet that has been correctly installed. The mains plug and the grounded socket match and the earthing system has been correctly installed.
Safety instructions Incorrectly placing (stacking) this appliance on top of a washing machine may result in injury, material damage and/or damage to the appliance. If this appliance is to be placed on top of a washing machine, the washing machine must be of at least the same depth and width as the appliance, and it must be secured in place with the appropriate connection set if available ~ Page 16. The appliance MUST be secured with this connection set. Stacking the appliance in any other way is forbidden.
en Safety instructions : Warning Risk of explosions/fire! ■ If there is any residual material left in the fluff filter, this may ignite when drying is in progress, or even cause the appliance to catch fire or explode. Clean out the fluff filter each time the appliance is used to dry laundry. Risk of expl osions/fire! ■ Certain objects may ignite when drying is in progress, or even cause the appliance to catch fire or explode. Remove any lighters or matches from pockets on items of clothing.
Safety instructions : Warning Risk of injury! ■ If you support your weight/sit on the appliance door when it is open, the appliance may tip over, which may result in injury. Do not support your weight on the appliance door when it is open. Risk of inIfjury! you climb onto the ■ appliance, the worktop may break, which may result in injury. Do not climb onto the appliance. Risk of inIfjury! you reach into the drum ■ while it is still rotating, you risk injuring your hands.
en ■ Safety instructions If the appliance overheats, it may not be able to operate properly, or this may result in material damage or damage to the appliance. Make sure that the appliance's air inlet is never obstructed when the appliance is in operation, and that the area around the appliance is adequately ventilated. Cleaning/Maintenance : Warning Danger of death! The appliance is powered by electricity. There is a risk of electric shock if you come into contact with live components.
Safety instructions en : Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only. Caution! Material damage/damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.
en Environmental protection Energy-saving tips 7 Environmental protection ■ Packaging/old appliance noitceorplamnoteriEv ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Installation and connection 5 Installation and connection Scope of delivery noitcednaoitlasnI ■ ■ ■ ■ Dryer Installation and operating instructions Basket for woollens* Condensation drain* Installing and connecting the dryer : Warning Risk of death! There is a risk of electric shock as the dryer is operated with electricity. ■ Check the dryer for visible damage. You must not operate the dryer if it is damaged.
en Installation and connection Changing the condensation drain 3. Disconnect the hose from the connecting piece and put it in the "parked" position. Note: The condensation from the dryer can either be discharged into the condensation container or drained off via a connection to the waste-water system. By default, the condensation from the dryer is discharged into the condensation container. Proceed as follows to change the condensation drain: 1. Remove the accessories from the dryer drum. 4.
Installation and connection en 5. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). & $ & % PD[ FP $ & PD[ FP $ PLQ FP PD[ FP Caution! Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked. Caution! Material damage due to leaks or draining water.
en Installation and connection Optional accessories Transport and frost protection Order optional accessories* from the after-sales service: 1. Empty the condensate container. 2. Select any programme using the programme selector. 3. Press the Start button. 4. Wait for 5 minutes. Note: The condensation is drained. 5. Empty the condensate container again. 6. Switch off the dryer.
The main points in brief en Y The main points in brief feirbnstiopnmaeTh 1 @ Load the laundry and close the door. -------- 2 @ @ End of the programme. -------- 3 Press the Start button. Switch the dryer on by turning the programme selector to the required programme. @ Remove the laundry. Switch the dryer off. @ Empty the condensate container. Clean the fluff filter.
en Getting to know your appliance * Getting to know your appliance Dryer ecnailpruoywnktgniGte # ; + 3 ( Condensate container 0 Control and display panel 8 Drum interior light* @ Dryer door H Air inlet P Fluff filter X EasyClean filter * depending on the model 18
Getting to know your appliance en Control panel + VFKUDQNWURFNHQ H[WUD VFKUDQNWURFNHQ VFKUDQNWURFNHQ H[WUD VFKUDQNWURFNHQ EJHOWURFNHQ %OXVHQ +HPGHQ 6SRUWVZHDU ([WUD .XU] +DQGWFKHU 'DXQHQ 0L[ :ROOH ILQLVK # ( 0 8 @ H Programme selector for switching the dryer on/off and selecting the programme. Programmes ~ Page 22. Start button for starting or interrupting the programme ~ Page 24. Buttons for applying default programme settings ~ Page 24. Display panel ~ Page 20.
en Getting to know your appliance Display panel Buttons on the display panel Display panel #+ ( Drying level. 0 Drying time. 8 Ready in. @ Anti-crease. H Low heat. For a detailed description of all buttons, see ~ Page 24 onwards. 20 Empty the condensation container ~ Page 27. ç Clean the EasyClean filter ~ Page 31. e ö » Q - ˜ - “Ÿš: Programme progress for Dry, Iron Dry, Cupboard Dry, Anti-crease, Pause and End of programme. E Childproof lock active ~ Page 24. ” Anti-Crease selected.
Laundry – Clean the moisture sensor regularly ~ Page 31. Z Laundry Preparing the laundry yrdnuaL : Warning Risk of explosion/fire! Remove any cigarette lighters and matches from pockets. Caution! The dryer drum and fabrics could be damaged. Remove all objects from pockets and observe the following information: ■ Tie cloth belts, apron strings, etc. together or use a laundry bag. ■ Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers.
en Programmes and buttons / Programmes and buttons Programmes snotubdnamrgsoeP Programme and fabrics Maximum load and programme settings/info Name of the programme Which fabrics is the programme suitable for? The maximum load is based on the dry weight of the fabrics Possible programme settings Cottons Cupboard Dry Plus 8 kg Hard-wearing, heat-resistant fabrics that are made of more than one layer of cotton or linen and do not dry readily.
Programmes and buttons Time Programme warm All types of fabric; time programme. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Notes ■ Only dry wool, sports shoes and soft toys with the basket for woollens ~ Page 16. ■ In the time programme, the laundry's residual moisture is not automatically detected. If the laundry is still too damp after the drying programme, repeat the programme and, if required, extend the programme length.
en Programmes and buttons Buttons Buttons Explanations and notes Note: Not all buttons and their functions can be selected in all programmes. Fine adjust If your laundry is too damp after drying, you can adjust the drying settings, e.g. Cupboard Dry, using the drying level button. The drying setting can be increased in three stages from – to • using the drying level button. Once you have adjusted the drying level, this setting will be retained even after the dryer has been switched off.
Operating the appliance 1 Operating the appliance Loading laundry and switching on the dryer ecnailpehtgniaOrep Note: The dryer must be correctly positioned and connected, ~ Page 13. 1. Place the laundry in the drum. 2. Turn the programme selector to any programme to switch the dryer on. 3. Close the dryer door. Caution! Possibility of material damage to the dryer or laundry. Take care not to trap any laundry in the door.
en Operating the appliance Changing the programme or adding laundry Removing laundry and switching off the dryer You can remove or add laundry and change or alter the programme at any time during drying. 1. Remove the laundry. 2. Turn the programme selector to the "off" position. 1. To pause the programme, open the dryer door or press the Start button. 2. Add or remove laundry. 3. Select another programme or an additional function, if required. 4. Close the dryer door. 5. Press the Start button.
Operating the appliance Emptying the condensate container en 2. Pour out the condensation water. Notes ■ You can drain off the condensation into the waste-water system using an optional condensation drain*. For installation, see ~ Page 14. ■ If you drain the condensation using an optional condensation drain, you do not have to empty the condensate container.
en Operating the appliance Clean the fluff filter Note: During drying, fluff and hair from the laundry is trapped by the fluff filter. If the fluff filter is blocked or dirty, this reduces the flow of air, which prevents the dryer from achieving its maximum performance. Clean fluff filters also reduce energy consumption and the drying time. Clean the fluff filter after each drying cycle: 5. Open both filters and remove all the fluff. 6. Rinse away the fluff under warm, running water. 1.
Signal setting M Signal setting You can change the following settings: en 5. The volume for the audible signal at the end of the programme is shown on the display. gniteslangSi ■ ■ ■ The spin speed that is used for spinning your laundry before it is dried, The volume of the audible signal at the end of the programme, The volume of the audible button signals. You will need to activate the setting mode in order to change these settings. Activating the setting mode 1. Switch the dryer on. 2.
en Noises > Noises Note: During drying, particularly in the initial phase, operation of the appliance results in noise from the compressor and pump. This is perfectly normal and does not impair proper functioning of the appliance. seNio From time to time, the compressor in the dryer generates a humming noise. However, the volume may vary depending on the programme and progress of the drying process. Every now and then, the compressor is ventilated. This creates a whirring noise.
Cleaning Cleaning the moisture sensor Note: The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is. After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products. Such residues must be removed regularly as the sensor function and in consequence the drying result may be impaired. Open the door and clean the moisture sensor with a coarse sponge.
en Cleaning 10. Check how dirty the dryer's heat exchanger is before putting the EasyClean filter back in. If it is very dirty, use a vacuum cleaner with a brush attachment to clean it carefully from top to bottom. Note: Take care not to bend or damage the fins on the heat exchanger when cleaning it. Caution! Risk of injury. You could cut yourself on the fins of the heat exchanger. Do not touch these with your hands. 11. Slide the EasyClean filter in and make sure it clicks into place. 12.
Faults and what to do about them en 3 Faults and what to do about them meht uobadt wahdnstluFa Faults ð on the display panel and drying has been interrupted. ç on the display panel. Cause/remedy ■ ■ Empty the condensate container and press the Start button. If the optional condensation drain has been installed, the drain hose may be blocked or kinked. Check the hose for deposits and flush the hose out. Make sure that the hose does not have any kinks when it is in place.
en Faults and what to do about them Faults Cause/remedy Laundry is not dried properly or is still too damp. After the programme has ended, warm laundry feels damper than it actually is. Spread the laundry out and allow the heat to disperse. ■ Finely adjust the dryness level – this extends the drying time but does not increase the temperature. Your laundry will become drier ~ Page 24. ■ Select a programme with a longer drying time or increase the dryness level. This does not increase the temperature.
Consumption values en [ Consumption values Consumption values table seulavnoimuCstp Programme Spin speed used for spinning the laundry Duration** Cottons Cupboard Dry* Iron Dry* 8 kg 4 kg 8 kg 4 kg 1400 rpm 180 min 101 min 1.52 kWh 0.91 kWh 1000 rpm 203 min 122 min 1.90 kWh 1.12 kWh 800 rpm 236 min 146 min 2.25 kWh 1.29 kWh 1400 rpm 123 min 74 min 1.12 kWh 0.66 kWh 1000 rpm 146 min 88 min 1.40 kWh 0.82 kWh 800 rpm 179 min 107 min 1.58 kWh 0.
en Technical data J Technical data Dimensions: 85 x 60 x 60 cm Height x width x depth Weight: Approx. 48 kg Maximum load: 8 kg Condensation container: 4.8 l Mains voltage: 220 - 240 V Connected load: Max. 600 W Fuse: 10 A Ambient temperature: 5 - 35 °C Power consumption when switched off: 0.10 W Power consumption when ready for use (left-on mode): 0.
After-sales service en J After-sales service After-sales service If you cannot rectify the fault yourself (faults, what to do?), please contact our after-sales service. We will always find an appropriate solution to avoid unnecessary visits by engineers. The contact information for your nearest after-sales service can be found here or in the enclosed after-sales service directory. Please provide after-sales service with the dryer's product number (E-no.) and production number (FD).
6
6
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.
