Tumble dryer WTYH67I9SN en Installation and operating instructions
Your new tumble dryer Display rules You have opted for a tumble dryer manufactured by Bosch. : Warning! Please take a few minutes to read and become familiar with the advantages of your tumble dryer. To meet the high quality demands required by Bosch, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www.boschhome.
en Contents enI stal tionandoperatinginstructions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Z Laundry . . . . . . . . . . . . . . . . . . . 28 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance ..5 ..6 ..8 . 10 / Programmes and buttons. . . . . 29 Environmental protection . . . . .12 Packaging/old appliance . . . . . . . . . 12 Coolant . . . . . . . . . . . . . . . . . . . . . . .
en Intended use D Cleaning . . . . . . . . . . . . . . . . . . 43 Cleaning the dryer and the control panel. . . . . . . . . . . . 43 Cleaning the moisture sensor . . . . . 44 Cleaning the filter in the condensate container . . . . . . 44 8 Intended use ■ Intedus ■ 3 Faults and what to do about them . . . . . . . . . . . . . . . . 45 [ Consumption values . . . . . . . . 47 Consumption values table . . . . . . . . 47 Most efficient programme for cotton fabrics . . . . . . . . . . . . . . .
Safety instructions ( Safety instructions The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings. It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.
en Safety instructions : Warning Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children. ■ ■ : Warning Eye/skin irritation! Contact with detergents or care products may cause eye/skin irritation. Rinse eyes/skin thoroughly if they/it come(s) into contact with detergents or care products. Keep detergents and care products out of the reach of children.
Safety instructions : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance's mains cable is altered or damaged, this may result in electric shock, short circuiting or fire due to overheating. The mains cable must not be kinked, crushed or altered, and must not come into contact with any heat sources.
en Safety instructions : Warning Risk of injury! ■ The appliance is very heavy. Lifting it may result in injury. Do not lift the appliance on your own. Risk of inThe jury! ■ appliance has sharp edges on which you could cut your hands. Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it. Risk of inIfjury! the hoses and mains ■ cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.
Safety instructions : Warning Risk of fire/material damage/ damage to the appliance! If a program is terminated before the drying cycle has finished, this prevents the laundry from cooling down sufficiently and may cause the laundry to ignite, or may result in material damage or damage to the appliance. ■ ■ During the last part of the drying cycle, the laundry in the drum is not heated (cooling cycle). This is to ensure that it remains at a temperature at which it will not be damaged.
en Safety instructions Caution! Material damage/damage to the appliance ■ If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not exceed the maximum load capacity of dry laundry. Make sure you comply with the maximum load capacities specified for each of the programs. ~ Page 29 Materi damage/damage the appliance ■ alIf you tooperate the appliance without a fluff catcher (e.
Safety instructions ■ ■ ■ ■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable. Do not make any technical modifications to the appliance or its features. Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary). Spare mains cables can be ordered from our customer service.
en Environmental protection 7 Environmental protection Energy-saving tips ■ Packaging/old appliance Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Installation and connection 5 Installation and connection Scope of delivery Instal ionadcetion ■ ■ ■ ■ Dryer Installation and operating instructions Basket for woollens* Condensation drain* Installing and connecting the dryer : Warning Risk of death! There is a risk of electric shock as the dryer is operated with electricity. ■ Check the dryer for visible damage. You must not operate the dryer if it is damaged.
en Installation and connection During installation, ensure that: ■ The dryer is placed on a clean, level and firm surface, ■ The mains plug can be accessed at all times, ■ The area around the dryer is kept clean and ■ The dryer is levelled using the threaded feet. Note: Check the alignment of the appliance with a spirit level and correct if necessary. Change the height by turning the appliance feet. All appliance feet must stand firmly on the ground.
Installation and connection 3. Carefully place the dryer door onto a flat surface, and place a hand towel or other such item between the door and the surface to avoid scratching or damaging the door. 4. Now remove the screws from the door hinge, and remove the hinge from the dryer door. 5. Remove the screws from the door handle on the dryer door and remove the door handle. en 7. Now lift the dryer door from the door ring.
en Installation and connection 10. Remove the cover from the door lock on the dryer and place it to one side. 11. Remove the door lock. 12. Insert the door lock (1.) on the other side of the dryer and screw the cover (2.) back on. 16 13. Now also screw the dryer door back on. 14. You can now reconnect the dryer, close the door and start a programme.
Installation and connection en Optional accessories Transport and frost protection Order optional accessories* from the after-sales service: 1. Empty the condensate container. 2. Select any programme using the programme selector. 3. Press the Start button. 4. Wait for 5 minutes. Note: The condensation is drained. 5. Empty the condensate container again. 6. Switch off the dryer.
en Draining the condensation water Œ Draining the condensation water Condensation will form in the appliance as it dries the laundry. You must ensure that the drain hose is connected when you operate the appliance. If there is no drain hose connected to the appliance, the condensation water from the appliance will run into the condensation container.
Draining the condensation water en 5. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). & $ & % PD[ FP $ & PD[ FP $ PLQ FP PD[ FP Caution! Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked. Caution! Material damage due to leaks or draining water.
en Draining the condensation water 6. Pull out the condensation container fully. 9. Slide in the condensation container until it clicks into place. 7. Turn the condensation container 180° onto its underside and remove the stopper that is fitted.Turn the condensation container back over and insert the stopper into the recess in the top of the condensation container. The condensation is now discharged via the drain hose into the waste-water system or into a wash basin 8.
Drying with the basket for woollens „ Drying with the basket Securing the basket for woollens The basket for woollens 1. Insert the feet of the basket for woollens into the holes in the fluff filter. for woollens Dryingwthebaskt forwl ens Note: The basket for woollens is supplied with your appliance* or it can be purchased as an accessory from our after-sales service.
en Drying with the basket for woollens Application examples ■ Laundry Laundry must be spun. Place laundry loosely in the insert; do not squash. – Trousers or skirt – Pullover ■ 22 Sports shoes Place sports shoes in the basket for woollens without the insert. Pull the tongue quite far out of the shoes. Remove insoles and heel cushions. Roll up a towel and place it under the sports shoes to create an inclined surface. Place the shoes so that the heels are on the towel.
Drying with the basket for woollens Putting the insert in place and starting a programme 1. Place the insert with laundry, sports shoes or soft toys in the basket for woollens. Caution! Risk of material damage to the laundry Place the laundry in the insert of the basket for woollens so that they do not come into contact with the drum. en 3. Set the drying time. The table below lists examples for the loads with a suggested drying time. Thin woollen pullover Approx. 1 h 20 Thick woollen pullover Approx.
en The main points in brief Y The main points in brief eThmainpotsinbref 1 @ Load the laundry and close the door. -------- 2 Switch the dryer on. @ Press the Start button A. -------- 3 24 Select a programme, and adjust the programme presettings as needed. @ Dry. @ Switch the dryer off. -------- @ Remove the laundry. @ Empty the condensation container. Clean the fluff filter.
Getting to know your appliance en *Getting to know your appliance Dryer Getingtoknwyuraplince # + 3 ( 0 8 @ H P Condensate container Control and display panel Drum interior light (depending on the model) Dryer door Air inlet Fluff filter 25
en Getting to know your appliance Control panel # + ( Programmes ~ Page 29. 0 Programme selector and On/Off button. 8 Display panel with buttons ~ Page 26. @ Start button for starting, pausing or cancelling the programme. H Buttons ~ Page 31.
Getting to know your appliance en Display panel Indicators/symbols Description 1 h 40 or 3 h Expected programme length in hours and minutes, or programme delay in hours after selecting the "Ready in" time. 120 min Length of the Anti-Crease cycle or programme length for timed programmes. Heat exchanger is being rinsed The heat exchanger is cleaned automatically. Please empty condensate container Empty the condensation container; ~ Page 36.
en Laundry Z Laundry Preparing the laundry Laundry : Warning Risk of explosion/fire! Remove any cigarette lighters and matches from pockets. Caution! The dryer drum and fabrics could be damaged. Remove all objects from pockets and observe the following information: ■ Tie cloth belts, apron strings, etc. together or use a laundry bag. ■ Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers. ■ Remove any metal objects, such as paper clips, from pockets.
Programmes and buttons en / Programmes and buttons Programmes Progamesndbutons Programme and fabrics Maximum load and programme settings/info Name of the programme Which fabrics is the programme suitable for? The maximum load is based on the dry weight of the fabrics Possible programme settings Cottons i Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen. 9 kg Easy-Care f Synthetic or blended fabrics. 3.5 kg Mixo Mixed load consisting of cotton and synthetic fabrics.
en Programmes and buttons Sport/Fitness w Weatherproof and outdoor clothing with a membrane coating and water-repellent fabrics. 1.5 kg Towels ¼ Hard-wearing towels made of cotton. 6 kg Super Quick 40’ ^ Synthetics and light cottons. 2 kg AllergyPlus ; Hard-wearing fabrics. Note: Particularly suitable for the highest hygiene requirements.
Programmes and buttons en Buttons Buttons Explanations and notes Note: Not all buttons and their functions can be selected in all programmes. Selection buttons ×Ö Select the setting you require from the list on the display panel. Ê (Dryness level): Select the dryness level (e.g. Cupboard Dry) or the drying time (20 mins up to 3 hrs 30 mins, depending on the model and programme). Select the dryness level according to the laundry to be dried.
en Programmes and buttons œ 3 sec. (Settings): Press the two selection buttons at the same time and hold them for 3 seconds. The menu will be displayed on the display panel. End signal or button signal Select the programme end signal volume or the button signal volume. Signal: Off – Quiet – Medium – Loud – Very loud. Default setting: Loud Autom. switch off Time after which the dryer automatically switches off once the programme has ended: Never, 15, 30 or 60 min.
Operating the appliance 1 Operating the appliance Loading laundry and switching on the dryer Operatingheaplince Note: The dryer must be correctly positioned and connected, ~ Page 13. 1. Place the laundry in the drum. 2. Press the # buttnon to switch the dryer on. 3. Close the dryer door. Caution! Possibility of material damage to the dryer or laundry. Take care not to trap any laundry in the door. Note: The dryer drum is lit up after the door is opened and closed and once the programme has started.
en Operating the appliance Changing the programme or adding laundry Removing laundry and switching off the dryer You can remove or add laundry and change or alter the programme at any time during drying. 1. Remove the laundry. 2. Press the # button to switch the dryer off. 1. To pause the programme, open the dryer door or press the Start button. 2. Add or remove laundry. 3. Select another programme or an additional function, if required. 4. Close the dryer door. 5. Press the Start button.
Operating the appliance en 3. Remove the fluff from the recess in the fluff filter. 6. Rinse away the fluff under warm, running water. Note: Ensure that no fluff falls into the open shaft. 4. Pull apart the two-part fluff filter. 7. Dry the fluff filter, close it and reinsert the two-part fluff filter. 5. Open both filters and remove all the fluff. Caution! The dryer may be damaged. Do not operate the dryer without a fluff filter or if the fluff filter is defective.
en Operating the appliance Emptying the condensate container Condensation will form in the appliance as it dries the laundry. If there is no drain hose connected to the appliance, the condensation water from the appliance will run into the condensation container. In this case, you will need to empty the condensation container each time the dryer finishes drying the laundry, and also if it becomes full before drying is complete. 1. Pull out the condensate container horizontally. 2.
Home Connect o Home Connect This appliance is Wi-Fi enabled and can be controlled remotely via a smartphone or tablet PC. With the Home Connect app, you can use your smartphone or tablet PC to do the following on this appliance: HomeCnct ■ ■ ■ ■ ■ Select and start programmes. Change programme settings. Query the status of programmes. Change appliance settings. Switch off the appliance.
en Home Connect 5. You can exit the Home Connect settings by selecting the } button. 4. Use either of the right-hand arrow buttons to select Connect. Note: If you were not able to establish a connection, check whether your appliance is within range of the home network and repeat the manual connection. Try connecting automatically again or connect your appliance manually ~ Page 38. 1. Switch the appliance on. 2. Press and hold the } button for more than three seconds. Aut.
Home Connect If the appliance has successfully connected to the home network, Connected è appears in the display panel. 9. You can exit the Home Connect settings by selecting the } button. Notes If you were not able to establish a connection, check whether your appliance is within range of the home network and repeat the manual connection. ■ If your smartphone or tablet PC is still connected to the HomeConnect network, you will need to connect it to your home network first.
en Home Connect Activating or deactivating Wi-Fi Resetting your network settings You can switch the Home Connect function on your appliance on or off permanently at any time. You can clear the network settings and break the connection to your smartphone or tablet PC by resetting the network settings. 1. Switch the appliance on. 2. Press and hold the } button for more than three seconds. Aut. network log-in appears in the display panel. 3.
Home Connect 6. You can exit the Home Connect settings by selecting the } button. en 4. Use either of the right-hand arrow buttons to select Install now. Note: If you want to operate the appliance via the Home Connect app again, you must reconnect it to your home network and to the Home Connect app either automatically or manually. 1HWZRUN VHWWLQJV 6RIWZDUH XSGDWH ,QVWDOO QRZ $YDLODEOH Updating the software You can update the Home Connect software on your appliance.
en Noises This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time. Note: Ensure that the Home Connect functions can be used only in conjunction with the Home Connect app. Information on data protection can be accessed in the Home Connect app.
Cleaning The automatic cleaning of the dryer causes a clicking sound. en D Cleaning Cleaning the dryer and the control panel Cleanig : Warning The condensation is pumped into the condensate container by a pump. This generates pumping noises. Risk of death! There is a risk of electric shock as the dryer is operated with electricity. Disconnect the dryer from the mains before cleaning. Clean the dryer using only water and a soft, damp cloth.
en Cleaning Cleaning the moisture sensor Note: The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is. After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products. Such residues must be removed regularly as the sensor function and in consequence the drying result may be impaired.
Faults and what to do about them en 3 Faults and what to do about them Faultsandwht odabut hem Faults Please empty condensate container on the display panel and drying has stopped. Please clean lint filter on the display panel. Cause/remedy ■ ■ Empty the condensation container; ~ Page 17and the dryer; . If the optional condensation drain* has been installed, the drain hose may be blocked or kinked. Check the hose for deposits and flush the hose through. Lay the hose without any kinks.
en Faults and what to do about them Faults Laundry is not dried properly or is still too damp. Drying time too long? Cause/remedy After the programme has ended, warm laundry feels damper than it actually is.Spread the laundry out and allow the heat to disperse. ■ Fine tune the dryness level – this extends the drying time but does not increase the temperature. Your laundry will become drier ~ Page 31. ■ Select a programme with a longer drying time or increase the dryness level.
Consumption values en [ Consumption values Consumption values table Consumptionvalues Programme Spin speed which is used for spinning the laundry Cottons Cupboard Dry* Iron Dry* Duration** Energy consumption** 9 kg 4.5 kg 9 kg 4.5 kg 1400 rpm 146 min 98 min 1.77 kWh 1.09 kWh 1000 rpm 166 min 108 min 2.06 kWh 1.24 kWh 800 rpm 186 min 118 min 2.35 kWh 1.39 kWh 1400 rpm 109 min 71 min 1.26 kWh 0.76 kWh 1000 rpm 129 min 81 min 1.55 kWh 0.91 kWh 800 rpm 149 min 91 min 1.
en Technical data J Technical data Dimensions: 85 x 60 x 60cm Height x width x depth Weight: Approx. 57kg Maximum load: 9 kg Condensation container: 4.6 l Mains voltage: 220 - 240 V Connected load: Max. 1000 W Fuse: 10 A cTehnialdt Drum interior light* Ambient temperature: 5 - 35 °C Power consumption when switched off: 0.10 W Power consumption when left on: 0.10 W Power consumption when networked (Wi-Fi) in standby mode/duration: 2.
After-sales service en JAfter-sales service After-sales service If you cannot rectify the fault yourself (faults, what to do?), please contact our after-sales service. We will always find an appropriate solution to avoid unnecessary visits by engineers. The contact information for your nearest after-sales service can be found here or in the enclosed after-sales service directory. Please provide after-sales service with the dryer's product number (E-no.) and production number (FD).
6
6
7 Advice and repair order in the event of faults GB IE 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.