Owner's Manual
Mounting
the
Bracket
pro.Bose.com
US-ONLY • KUN USA • NUR USA • SOLO
EE
UU • ETATS-UNIS UNIQUEMENT • SOLO USA • ALLEEN VS • ENDAST USA
With
standard
steel4
11
x 4
11
junction
box
The
FreeSpace®
DS
40SEISC loudspeaker can be mounted
directly on standard U.S. steel 4" x 4" junction boxes. There may
be several junction boxes available that are compatible with the
FreeSpace
DS
40SEISC wall mount bracket, but Bose Corporation
only recommends the junction boxes it has validated.
U.S.
4-
x
4-
Standard Steel
Junction
Boxes
Approved
by
Bose
Manufacturer
Catalog
Number
Steel City
52151-1/2
& 3/4-EW
Raco 232/8232
Please check pro.Bose.com for an up-to-date list
of
Bose®
validated junction boxes.
Page
22
E
nglish
• It is the responsibility
of
the installer
to
properly install junction
boxes
to
ensure the safety
of
the loudspeaker installation.
Consult a building professional for the proper junction
box
installation methods before installing the loudspeaker.
• The junction
box
should be installed
in
such a way that it is
structurally capable
of
supporting the weight
of
the loudspeaker.
A
10:1
safety weight ratio is recommended.
• Failure
to
properly install a junction
box
or
loudspeaker could
result
in
damage, injury,
or
death.
• When installing the FreeSpace
DS
40SEISC loudspeaker on
a Bose-validated on-wall junction box, only two
(2)
of
the four
(4)
screw holes
of
the wall mount bracket will be used. Bose
has conducted extensive tests
to
ensure that this loudspeaker
mounting scheme results
in
a safe installation. This loudspeaker
mounting scheme has passed a
10:1
safety weight ratio test.
• Use #8-32 x
%"screws
with #8 washers
or
#8-32 x
%"truss
head screws
to
mount the bracket
to
the junction box.
In
s
tallation
and
Safety
Guidelines