Owner's Manual

Page 28 Installation and Operating Guide English
Installation and Operating Guide pro.Bose.com
Max Input Level
Select the maximum input level for both A and B inputs. There are three selectable values: 0 dBu, 6 dBu, and 18 dBu. Using
documentation for the audio source device, determine the maximum output level and select the corresponding values on the SP-24
sound processor. If the maximum input level for the source is higher than 18 dBu, either limit the output of the source using a
master output control or use an inline pad to reduce the maximum level to 18 dBu or less.
Max Input Level
18 dBu
6 dBu
0 dBu
To set Max Input Level:
1. Navigate to Max Input Level in the Utility Menu.
2. Press
.
3. Use
to select the desired maximum input level.
4. Press SELECT/LOAD to save the setting.
5. Press
to exit.
Input Gain
Set the input gain for each input. Range of control: -60 dB to 12 dB; 0.5 dB increments.
Input Gain
InA
InB
InA xx.x dB
InB xx.x dB
To set Input Gain:
1. Navigate to Input Gain in the Utility Menu.
2. Press
to locate the desired input channel (InA or InB).
3. Press
to select.
4. Use
to set the input gain.
5. Press SELECT/LOAD to save the setting.
6. Press
to exit.
Delay
Set the output delay independently for each output channel. Range of control: 0 ms to 170 ms; 0.5 ms increments.
Delay
Out1
Out2
Out3
Out4
Out1 xxx.x ms
Out2 xxx.x ms
Out3 xxx.x ms
Out4 xxx.x ms
To set Delay:
1. Navigate to Delay in the Utility Menu.
2. Press
to locate the desired channel (Out1, Out2, Out3, Out4).
3. Press
to select.
4. Use
to set the delay.
5. Press SELECT/LOAD to save the setting.
6. Press
to exit.
Output Gain
Set the output gain independently for each channel. Range of control: -60 dB to 0 dB; 0.5 dB increments.
Output Gain
Out1
Out2
Out3
Out4
Out1 xx.x dB
Out2 xx.x dB
Out3 xx.x dB
Out4 xx.x dB
To set Output Gain:
1. Navigate to Output Gain in the Utility Menu.
2. Press
to locate the desired output channel (Out1, Out2, Out3, Out4).
3. Press
to select.
4. Use
to set the output gain.
5. Press SELECT/LOAD to save the setting.
6. Press
to exit.
User Lockout
Locks the navigation buttons to prevent tampering with the settings. When Lockout is engaged, the current state of the controller is
fixed. User Lockout does not prevent access by the SP-24 Editor access via USB.
User Lockout
Press > to Lock
To lock:
1. Navigate to User Lockout in the Utility Menu.
2. Press
.
3. Select
to engage lockout or press to abort.
4. Sound processor will automatically return to a locked Home Screen.