Owner's Manual

English • 7Owner's Guide • S1 Pro System

System Setup

Connections and Controls

The S1 Pro control panel provides the necessary connectors, controls and indicators for operation.

Use Channel 1 and 2 inputs for microphones and musical instruments. Integrated ToneMatch® signal

processing allows microphones and instruments to sound their best. Use Channel 3 for Bluetooth®

connectivity and line-level inputs.

q Signal/Clip indicator: Displays the input signal status in color.

Green: Signal present

Red: Signal clipping

Note: Reduce the corresponding volume control to prevent signal clipping.

w Volume control: Adjust the volume of your microphone, instrument or audio source.

e Treble control: Adjust the high-frequency balance of your microphone or instrument.

r Bass control: Adjust the low-frequency balance of your microphone or instrument.

t Reverb control: Adjust the amount of reverb applied to your microphone or instrument.

y ToneMatch switch: Move the switch to the or position to enable the ToneMatch preset.

u Channel input: Analog input for connecting microphone (XLR) and instrument (TS unbalanced) cables.

i Aux input: Use a 3.5 mm TRS cable to connect a line-level audio source.

o Line Output: Use a ¼" TRS cable to connect the line-level output to the Channel 1 or 2 input of a second

S1Pro to create a mono, two-loudspeaker setup.

Note: Line Out is post mix.

a Service port: Micro-USB connector for Bose service use only.

s Bluetooth Pair button: Used to set up pairing with Bluetooth-capable devices, such as mobile phones,

tablets and laptops.

SIGNAL SIGNAL SIGNAL

123