Owner's Manual

ManualsBrandsBose Professional ManualsCommercial audio & videoBose® DesignMax DM6SE

DesignMax DM6SE

Surface-mount Loudspeaker

Installation Guide .......................2

Guía de instalación .....................9

Notice d’installation ................... 16

Installationsanleitung ..................23

Guida all'installazione ..................30

Installatiehandleiding ..................37

Monteringsveiledning ..................44

Instrukcja montażu .....................51

安装指南 ..............................58

安裝指南 ..............................65

設置ガイド .............................72

79 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of content (11 pages)

PAGE 1
DesignMax DM6SE Surface-mount Loudspeaker Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . 2 Guía de instalación. . . . . . . . . . . . . . . . . . . . . . 9 Notice d’installation . . . . . . . . . . . . . . . . . . . . 16 Installationsanleitung. . . . . . . . . . . . . . . . . . . 23 Guida all'installazione. . . . . . . . . . . . . . . . . . 30 Installatiehandleiding. . . . . . . . .
PAGE 2
Important Safety Instructions Please read and keep all safety and use instructions. This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed-installation systems. Please read this document and all safety warnings before attempting installation. Do not attempt to service this product yourself.
PAGE 3
Overview PRO.BOSE.COM Package Contents ×2 ×2 ×2 ×2 Product Dimensions 245 mm 9.75 in 229 mm 9.00 in 340 mm 13.39 in 222 mm 8.74 in Ø 5.5 mm 0.22 in Technical Specifications For additional specifications, see the DesignMax DM6SE technical data sheet at PRO.BOSE.COM. Physical Product Dimensions 223 mm 8.78 in Height: 340 mm (13.39 in) Width: 222 mm (8.74 in) Depth: 229 mm (9.00 in) Net Weight, Loudspeaker with grille and bracket (single) 6.40 kg (14.1 lb) Shipping Weight (pair) 14.74 kg (32.
PAGE 4
Setup PRO.BOSE.COM Installation Options q w Installation Options and Accessories q Mounting bracket (included) w MBPWR-50 pan-and-tilt bracket (optional) Single In In and Out Wide Open Preparing the Weather-resistant Input Cover The weather-resistant input cover is designed for three different wiring scenarios (see above). To change the configuration of the input cover to support your wiring scenario, cut along the perforation on the rubber conduit.
PAGE 5
Setup PRO.BOSE.COM Wiring the Loudspeaker Wire Gauge The DesignMax DM6SE loudspeaker is designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.1 mm2) size wire only. Connection Diagrams Expose six millimeters (1/4 inch) of bare wire to attach to the terminals. Note: The loudspeaker is not rated for use with a rigid conduit. The loudspeaker is suitable for a flexible conduit or wiring connection only. 8Ω 8Ω 8Ω 70V/100V 8Ω 8Ω Loudspeaker Settings 70V 2.
PAGE 6
Installation PRO.BOSE.COM Loudspeaker Orientation q w Choose the loudspeaker orientation best suited for your installation. q Horizontal w Vertical Note: Installation in close proximity to cooking surfaces where the loudspeaker may be directly exposed to cooking oils, such as in commercial cooking environments, may decrease the performance or functionality of the loudspeaker.
PAGE 7
Installation PRO.BOSE.COM Important Mounting Information r q Bracket lock tabs: Used to secure the loudspeaker angle. w Grille release tabs: Used to secure the grille to the loudspeaker. e Lock forks: Used to secure the loudspeaker to the mounting bracket. r Angle labels (on bracket): Identify your desired angle position. w w e e q q w Installing the Loudspeaker WARNING: Failure to follow the steps below could lead to an unsafe mounting condition, which could create a falling hazard. 1. 2. 3. 4.
PAGE 8
Installation PRO.BOSE.COM Adjusting the Logo Attaching the Grille You can rotate the Bose logo to align with your loudspeaker orientation. With one hand, press the button on the back of the grille. Rotate the logo with the other hand. The logo can be rotated clockwise or counterclockwise. Note: Do not pinch the button inward unless you intend to remove the logo. Place the grille over the front of the loudspeaker and push it firmly until it snaps into place.
PAGE 10
DesignMax Loudspeakers DM6SE Surface-mount Loudspeaker PROFESSIONAL