Owner's Manual
Connecting
the
Acoustimass® module
to
the
center
and
front
cube
speakers
CAUTION: Never connect the cubes directly
to
the receiver Always connect the cube
speakers
to
the Acoustimass module, then connect the Acoustimass module
to
the receiver
Use the 20 foot
(6
m)
cable with three pairs
of
wires to connect the Acoustimass module
to
the center and front cube speakers Refer
to
Figure 8
Connect the wire pair marked CENTER to the cube speaker you have placed
in
the center
position Press the terminal tab on the back
of
the speaker (Figure
9)
Then insert the
marked wire
(+)
into the red terminal and the plain wire (-) into the black terminal Release
the tab to secure the wires
in
place
Figure9
Speaker cable connections
to
the cube speaker
o
2
In
the same way as
in
step
1,
connect the wire pair marked RIGHT
to
the cube speaker
you have placed
in
the right front position (to the right
of
the
TV
as
you face
it)
3
In
the same way as
in
step
1,
connect the wire pair marked LEFT to the cube speaker you
have placed
in
the left front position (to the left
of
the TV
as
you face
it)
At the Acoustimass module, check to be sure the connectors are firmly inserted into the
proper OUTPUTS TO CUBE SPEAKERS jacks
• The black L connector goes into the L jack
• The gray C connector goes into the C jack
• The black R connector goes into the R jack
Connecting
the
Acoustimass module
to
the
surroundcube
speakers
Use the 50 foot
(15
m)
cable with
two
pairs
of
wires to connect the right and left surround
cube speakers
to
the Acoustimass module Refer to Figure 8
1 Connect the wire pair marked RIGHT SURROUND to the right surround cube speaker
(on
your right
as
you face the
TV)
Press the terminal tab
on
the back
of
the speaker (Figure
9)
Then insert the marked wire
(+)
into the red terminal and the plain wire (-) into the black
terminal Release the tab
to
secure the wires
in
place
2
In
the same way as
in
step
1,
connect the wire pair marked
LEFT
SURROUND to the left
surround cube speaker
(on
your left as you face the
TV)
At the Acoustimass module, make sure the gray connectors are firmly inserted into the
LS
and
RS
OUTPUTS TO CUBE SPEAKERS jacks
11