Owner's Manual
Cleaning
your
speakers
Wipe the cube speakers using a damp cloth Do not use solvents
or
chemicals
Do
not allow
liquids
to
spill on
or
objects
to
drop into the Acoustimass® module or the speaker grilles
You
may vacuum the grilles carefully, the drivers are directly behind the grille cloth No other
maintenance is needed
Troubleshooting
If you have a problem with your Acoustimass 6 speaker system, turn off your sound source
and try the solutions below If you still have a problem, contact your
Bose®
dealer
to
arrange
for service
To
contact Bose directly, refer
to
the inside back cover
of
this guide
Problem
System does not function
at
all
No sound
No surround sound
16
What
to
do
• Make sure the power cord of the receiver
is
plugged into
an
operating AC wall outlet and
the receiver
is
turned on
•
Be
sure to select a source at the receiver (video, CD, tuner)
• Check the cube speaker and Acoustimass module connections Turn on the receiver
• Check connections of external components
to
the receiver
• Increase the volume
• Disconnect any headphones
• If your surround sound receiver
is
Pro-Logic, be sure your receiver is connected to a stereo
sound source
(TV,
VCR,
laserdisc
or
DSS player) by
an
RCA stereo cable If the receiver is
connected directly
to
a stereo television, make sure that all other program sources
(VCR,
laserdisc or DSS player) are connected to the
TV
using RCA stereo cables as well
• If your surround sound receiver is Dolby Digital (AC-3), be sure the sound source
(DSS,
laserdisc or
DVD
player) is connected directly
to
your receiver as shown
in
the owner's
guide
• On your
T\I,
turn off enhanced surround sound, if available Set your
TV
for stereo only