Owner's Manual

Installing the mounting brackets (cont.)
Installing the brackets onto a deck railing or table (cont.}
Finally, install the four screws using a Phillips-head screwdriver (Figure 10)
Figure 10
Installing the bracket onto a
deck railing or table
~ Note: Ifyou are mounting your 251™ speakers on a deck ramng or table, you will need to
rotate the Bose logo Refer to "Rotating the Bose logo" on page 11 for instructions on how to
do this
Attaching the speakers to the brackets
Once the brackets are installed, carefully follow these steps to attach the speakers to the
brackets First, insert the knobs into each side
of the speakers Be sure to turn each knob
two full rotations (Figure 11) Then, carefully slide the speakers into the brackets (Figure 12)
Finally, temporarily tighten the speaker
in a position that will allow you to easily connect the
speaker wire (Figures 13A and 13B)
Figure 11
Installing the knobs
Figure 12
Sliding the speakers into the
brackets
two full rotations
8