User's Manual

English - 27
Connecting two sources to the soundbar
If you do not get sound from any source, such as a DVD/Blu-ray Disc
™
player,
cable/satellite box, game system or DVR, connected to your TV, connect it to the
soundbar. Use only one audio cable for each source.
1. On the back of each source, locate the Audio OUT (digital) connector panel.
2. Choose a separate audio cable for each source using either Option 1 or
Option 2 (see page 28).
Note: You MUST use either Option 1 or Option 2. Do not use the coaxial cable
and optical cable at the same time.
3. If you have not already, disconnect your TV from the soundbar.
4. Separately connect the chosen audio cable from each source’s Audio OUT
(digital) connector panel to the soundbar.
Note: Do not disconnect your source's video cable, such as an HDMI
™
cable,
from your TV.
Option 1
This figure shows two source connections using an optical cable and 3.5 mm to
RCA stereo cable (not provided).
CAUTION: If using an optical cable, remove the protective caps from both ends.
Inserting the plug in the wrong orientation can damage the plug and/or
the connector.
3.5 mm to RCA
stereo cable
(not provided)
Audio OUT
Source 2
Audio OUT
Source 1
Soundbar connector panel
Alternate Setup