Brochure

1
OF 3
TECHNICAL DATA SHEET
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
Key Features
• FLEX array: Bose
®
exclusive exible bafe can be congured into four
unique shapes, allowing you to choose the best possible coverage pattern
for the application
• Eight-driver mid/high line array: Eight vertically mounted drivers, each
mounted on a custom waveguide, help deliver wide, consistent coverage
• 12-inch LF driver: High-performance woofer provides strong low-frequency
output
• 2-channel integrated mixer: 2 inputs with independent level controls
accommodate XLR, 0.25-inch and RCA connectors
Product Overview
The Bose
®
F1 Model 812 Flexible Array Loudspeaker is the rst powered portable loudspeaker that lets you control its vertical
coverage pattern. Simply push or pull the array into position to create “Straight,” “C”, “J”, or “Reverse-J” coverage patterns.
And once set, the system automatically changes the EQ to maintain optimum tonal balance for each coverage pattern. So
whether you’re playing at oor level, on a stage, or facing raked seats or bleachers, you can now adapt your PA to match the
room. Engineered with a exible array of eight high-output mid/high drivers, a high-powered 12-inch woofer, a lower crossover
point and 1,000-watt amplier, the loudspeaker delivers high SPL performance while maintaining vocal and midrange clarity
that’s dramatically better than conventional loudspeakers.
Technical Specications
System Performance
System Type Self powered, two-way
Frequency Response (-3 dB) 52 Hz - 15.5 kHz
Frequency Range (-10 dB) 43 Hz - 20 kHz
Nominal Dispersion 100° H x 40° V (C-position)
Maximum SPL @ 1 m 126 dB SPL (132 dB SPL peak)
Crossover Frequency 600 Hz 4th order Butterworth
Amplication
System Power 1000 W
Distortion at Rated Power 0.1% Max (30 Hz - 15 kHz)
System Limiter Dynamic limiter
Tranducers
Driver Compliment 8 x 2.25” mid-high drivers; 1 x 12” LF driver
Channels
Channel 1 Channel 2
Front Power Indictaor Blue LED: system on Blue LED: system on
Rear Indicators POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
Input Connections XLR /1/4” XLR: Pin 1 (GND), Pin 2 (+), Pin 3 (-) 1/4” TS/TRS, (2) RCA
Channel Gain -Innity to +34 dB (Line), -Innity to +54 (MIC) -Innity to +26 dB (RCA), -Innity to +20 dB (1/4”)
Maximum Input Signal +24 dBu (Line), +18 dBu (MIC) +10 dBu (RCA), +20 dBu (1/4” Unbalanced), +24 dBu (1/4”)
Input Impedance 2.2 kΩ (MIC), 10 kΩ (Line) 10 kΩ (1/4”), 10 kΩ (RCA)
Controls Volume level, Signal input select, Front LED function select, EQ Volume level, Signal input select, Front LED function select, EQ
Additional Connections
Line Output XLR balanced
AC Mains IEC Connector
Physical
Enclosure High impact composite materials
Grille Powder-coated perforated steel grille
Dimensions (H x W x D) 664.66 mm x 334.3 mm x 372.5 mm (26.1” x 13.1” x 14.6”)
Net Weight 20.18 kg (44.5 lbs)
Power Supply Voltages
Universal AC power rating: 100-240 V, 50 / 60 Hz +/- 20 %, 200 W max