Owner's Manual
Table Of Contents
- Owner’s Guide
- Important Safety Instructions
- Contents
- Introduction
- Setting Up the System
- Operation
- F1 Model 812 Control Panel
- F1 Subwoofer Control Panel
- Power On/Off Sequence
- Setting EQ selector switches
- Connecting Sources
- Connection Scenarios
- Full band, mixing console stereo output to L/R F1 Model 812 Loudspeakers
- Full band with mixing console, one F1 Subwoofer and two F1 Model 812 Loudspeakers
- Mixing console stereo output to F1 Subwoofer and left/right F1 Model 812 Loudspeakers
- Full band with mixing console stereo output to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Stereo input to Left/right F1 Subwoofers and F1 Model 812 Loudspeakers
- Mic to F1 Model 812 Loudspeaker INPUT 1
- Mobile device to single F1 Model 812 Loudspeaker
- Mobile device to F1 Flexible Array Loudspeaker system
- Mobile device to F1 Model 812 Loudspeaker and F1 Subwoofer
- DJ Console to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Care and Maintenance
- Additional Resources
14 - English
Operation
Mixing console stereo output to F1 Subwoofer and left/right F1 Model 812 Loudspeakers
Note: The recommend EQ settings are provided under the heading, “Power On/Off Sequence” on page 12. How-
ever, for maximum bass response, set the EQ selector switch on both F1 Model 812 Loudspeakers to FULL
RANGE and set the EQ selector switch on the F1 Subwoofer to THRU.
Set LINE
OUTPUT EQ
to THRU
(full range).
If using INPUT 1,
set F1 Model 812
SIGNAL INPUT to
LINE LEVEL.
F1 Subwoofer
F1 Model 812
F1 Model 812
Set F1 Model 812
EQ to WITH SUB.
L
R
INPUT1
INPUT2
SYSTEM
- - -
-
FRONT
""
•-
=ER
°"
"
r;
0
'
r;
0
UNEOUTPUT
"""
r.
0
r.
100--·
"°"'"
U-1.2.t.51WDH2
,: ,:
,:
INPUT1 INPUT2
SYSTEM
$10NALtCUP
$1GNAL/CUP
POl'<£RIFAlA-T
- - -
C)
C)
-
,aom
""
•-
=ER
r;
M<
0
'
r;
• - WITHSUB
0
UN
EO
UTPUT
"""
r.
0
r.