Owner's Manual
Table Of Contents
- Owner’s Guide
- Important Safety Instructions
- Contents
- Introduction
- Setting Up the System
- Operation
- F1 Model 812 Control Panel
- F1 Subwoofer Control Panel
- Power On/Off Sequence
- Setting EQ selector switches
- Connecting Sources
- Connection Scenarios
- Full band, mixing console stereo output to L/R F1 Model 812 Loudspeakers
- Full band with mixing console, one F1 Subwoofer and two F1 Model 812 Loudspeakers
- Mixing console stereo output to F1 Subwoofer and left/right F1 Model 812 Loudspeakers
- Full band with mixing console stereo output to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Stereo input to Left/right F1 Subwoofers and F1 Model 812 Loudspeakers
- Mic to F1 Model 812 Loudspeaker INPUT 1
- Mobile device to single F1 Model 812 Loudspeaker
- Mobile device to F1 Flexible Array Loudspeaker system
- Mobile device to F1 Model 812 Loudspeaker and F1 Subwoofer
- DJ Console to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Care and Maintenance
- Additional Resources
English - 21
Care and Maintenance
Technical Information
Physical
Dimensions Weight
F1 Model 812 Loudspeaker 26.1" H x 13.1" W x 14.6" D (665 mm H x 334 mm W x 373 mm D) 44.5 lb (20.18 Kg)
F1 Subwoofer 27.0" H x 16.1" W x 17.6" D (688 mm H x 410 mm W x 449 mm D) 55.0 lb (24.95 Kg)
F1 system stack 73.5" H x 16.1" W x 17.6" D (1868 mm H x 410 mm W x 449 mm D) 99.5 lb (45.13 Kg)
Electrical
AC power rating Peak inrush current
F1 Model 812 Loudspeaker
100–240V
2.3–1.2A 50/60Hz
120 V RMS: 6.3A RMS
23 V RMS: 4.6A RMS
F1 Subwoofer
100–240V
2.3–1.2A 50/60Hz
120 V RMS: 6.3A RMS
23 V RMS: 4.6A RMS
Input/Output Connector Wiring Reference
TRS balanced TS unbalanced
XLR balanced
1 – Shield (ground)
3 – Minus (–)
2 – Plus (+)
XLR unbalanced
1 – Shield (ground)
3 – Minus (–)
2 – Plus (+)
RING
TIP
SLEEVE
~TIP
~
SLEEVE